Sisyphus Industries Community

I used node-red running on a RasPi to connect my Sisyphus to HomeKit. I can see the tables state and change brightness and speed and send it into sleep mode. It's all mapped as "lights" in homekit, but it works, see picture. It uses the HomeKit-bridged-nodes (). Flows are pasted below (import to node red), you need to set the IP in every HTTP node to your table's local IP. ( replace all <your sisyphus IP> with e.g. 192.168.0.100) [ { "id": "9fae6a4f07359a53", "type": "tab", "label": "Sisi", "disabled": false, "info": "", "env": [] }, { "id": "73509f73e6f51240", "type": "http request", "z": "9fae6a4f07359a53", "name": "Status", "method": "POST", "ret": "txt", "paytoqs": "ignore", "url": "<your sisyphus IP>:3002/sisbot/state", "tls": "", "persist": false, "proxy": "", "insecureHTTPParser": false, "authType": "", "senderr": false, "headers": [], "x": 590, "y": 200, "wires": [ [ "e378416052644b5a" ] ] }, { "id": "41e11e07a32918a5", "type": "debug", "z": "9fae6a4f07359a53", "name": "Sisiphus", "active": false, "tosidebar": true, "console": false, "tostatus": false, "complete": "payload", "targetType": "msg", "statusVal": "", "statusType": "auto", "x": 780, "y": 300, "wires": [] }, { "id": "fc3777898e1070ac", "type": "inject", "z": "9fae6a4f07359a53", "name": "", "props": [ { "p": "payload" }, { "p": "topic", "vt": "str" } ], "repeat": "300", "crontab": "", "once": true, "onceDelay": "0.5", "topic": "", "payload": "", "payloadType": "date", "x": 410, "y": 200, "wires": [ [ "73509f73e6f51240" ] ] }, { "id": "e378416052644b5a", "type": "json", "z": "9fae6a4f07359a53", "name": "", "property": "payload", "action": "", "pretty": false, "x": 790, "y": 200, "wires": [ [ "41e11e07a32918a5", "39df053a83dd1fba", "a8f8972fcca98982", "7f4956edc8867b95", "4fa0f7929fdf5ddf" ] ] }, { "id": "9bc253a01a47fc47", "type": "http request", "z": "9fae6a4f07359a53", "name": "Brightness", "method": "POST", "ret": "txt", "paytoqs": "ignore", "url": "<your sisyphus IP>:3002/sisbot/set_brightness", "tls": "", "persist": false, "proxy": "", "insecureHTTPParser": false, "authType": "", "senderr": false, "headers": [], "x": 670, "y": 420, "wires": [ [ "38fa7a64f8e3342d" ] ] }, { "id": "38fa7a64f8e3342d", "type": "json", "z": "9fae6a4f07359a53", "name": "", "property": "payload", "action": "", "pretty": false, "x": 830, "y": 420, "wires": [ [ "c2e66511672b15ad" ] ] }, { "id": "af36a800b4bc3cf9", "type": "ui_slider", "z": "9fae6a4f07359a53", "name": "", "label": "Licht", "tooltip": "", "group": "6554eaffa3deadf7", "order": 0, "width": 0, "height": 0, "passthru": false, "outs": "end", "topic": "topic", "topicType": "msg", "min": 0, "max": "100", "step": "5", "className": "", "x": 170, "y": 420, "wires": [ [ "40a03d00d8309ebb" ] ] }, { "id": "40a03d00d8309ebb", "type": "change", "z": "9fae6a4f07359a53", "name": "", "rules": [ { "t": "set", "p": "payload", "pt": "msg", "to": "{\"data\":{\"value\": payload / 100 }}", "tot": "jsonata" }, { "t": "move", "p": "payload", "pt": "msg", "to": "payload.data", "tot": "msg" } ], "action": "", "property": "", "from": "", "to": "", "reg": false, "x": 350, "y": 420, "wires": [ [ "9bc253a01a47fc47" ] ] }, { "id": "39df053a83dd1fba", "type": "change", "z": "9fae6a4f07359a53", "name": "Brightness?", "rules": [ { "t": "set", "p": "payload", "pt": "msg", "to": "payload.resp[0].brightness", "tot": "msg" }, { "t": "set", "p": "payload", "pt": "msg", "to": "$number(payload * 100)", "tot": "jsonata" } ], "action": "", "property": "", "from": "", "to": "", "reg": false, "x": 990, "y": 220, "wires": [ [ "de60c524a09d4ed9", "d775e7cc56dbeac6" ] ] }, { "id": "63f2f9f64b897f20", "type": "http request", "z": "9fae6a4f07359a53", "name": "Play", "method": "POST", "ret": "txt", "paytoqs": "ignore", "url": "<your sisyphus IP>:3002/sisbot/play", "tls": "", "persist": false, "proxy": "", "insecureHTTPParser": false, "authType": "", "senderr": false, "headers": [], "x": 670, "y": 520, "wires": [ [ "6b0dd9ecaa2e6638" ] ] }, { "id": "9075a0b57341fafe", "type": "ui_switch", "z": "9fae6a4f07359a53", "name": "", "label": "Bewegung", "tooltip": "", "group": "6554eaffa3deadf7", "order": 1, "width": 0, "height": 0, "passthru": false, "decouple": "true", "topic": "topic", "topicType": "msg", "style": "", "onvalue": "true", "onvalueType": "bool", "onicon": "", "oncolor": "", "offvalue": "false", "offvalueType": "bool", "officon": "", "offcolor": "", "animate": false, "className": "", "x": 190, "y": 560, "wires": [ [ "9b345ce68657d103" ] ] }, { "id": "9b345ce68657d103", "type": "switch", "z": "9fae6a4f07359a53", "name": "", "property": "payload", "propertyType": "msg", "rules": [ { "t": "true" }, { "t": "false" } ], "checkall": "true", "repair": false, "outputs": 2, "x": 330, "y": 560, "wires": [ [ "c7ae165f5a97da02" ], [ "26d88f94f53e2873" ] ] }, { "id": "1cdd2ca370b02943", "type": "http request", "z": "9fae6a4f07359a53", "name": "Pause", "method": "POST", "ret": "txt", "paytoqs": "ignore", "url": "<your sisyphus IP>:3002/sisbot/pause", "tls": "", "persist": false, "proxy": "", "insecureHTTPParser": false, "authType": "", "senderr": false, "headers": [], "x": 670, "y": 580, "wires": [ [ "7194fd74f010df06" ] ] }, { "id": "c7ae165f5a97da02", "type": "change", "z": "9fae6a4f07359a53", "name": "", "rules": [ { "t": "set", "p": "payload", "pt": "msg", "to": "{\"data\":{}}", "tot": "jsonata" }, { "t": "move", "p": "payload", "pt": "msg", "to": "payload.data", "tot": "msg" } ], "action": "", "property": "", "from": "", "to": "", "reg": false, "x": 510, "y": 540, "wires": [ [ "63f2f9f64b897f20" ] ] }, { "id": "26d88f94f53e2873", "type": "change", "z": "9fae6a4f07359a53", "name": "", "rules": [ { "t": "set", "p": "payload", "pt": "msg", "to": "{\"data\":{}}", "tot": "jsonata" }, { "t": "move", "p": "payload", "pt": "msg", "to": "payload.data", "tot": "msg" } ], "action": "", "property": "", "from": "", "to": "", "reg": false, "x": 510, "y": 580, "wires": [ [ "1cdd2ca370b02943" ] ] }, { "id": "a8f8972fcca98982", "type": "change", "z": "9fae6a4f07359a53", "name": "Playing?", "rules": [ { "t": "set", "p": "payload", "pt": "msg", "to": "payload.resp[0].state", "tot": "msg" }, { "t": "set", "p": "payload", "pt": "msg", "to": "$boolean(payload=\"playing\")", "tot": "jsonata" } ], "action": "", "property": "", "from": "", "to": "", "reg": false, "x": 980, "y": 140, "wires": [ [ "220b9afe727d6406", "6d7b734893d635eb" ] ] }, { "id": "a08c778833c866a8", "type": "http request", "z": "9fae6a4f07359a53", "name": "Sleep", "method": "POST", "ret": "txt", "paytoqs": "ignore", "url": "<your sisyphus IP>:3002/sisbot/sleep_sisbot", "tls": "", "persist": false, "proxy": "", "insecureHTTPParser": false, "authType": "", "senderr": false, "headers": [], "x": 690, "y": 700, "wires": [ [ "cda674dd875afcac" ] ] }, { "id": "49d0ad8faaf2927e", "type": "ui_switch", "z": "9fae6a4f07359a53", "name": "", "label": "Schlafen", "tooltip": "", "group": "6554eaffa3deadf7", "order": 1, "width": 0, "height": 0, "passthru": false, "decouple": "true", "topic": "topic", "topicType": "msg", "style": "", "onvalue": "true", "onvalueType": "bool", "onicon": "", "oncolor": "", "offvalue": "false", "offvalueType": "bool", "officon": "", "offcolor": "", "animate": false, "className": "", "x": 200, "y": 740, "wires": [ [ "14949e5be26a1b5a" ] ] }, { "id": "14949e5be26a1b5a", "type": "switch", "z": "9fae6a4f07359a53", "name": "", "property": "payload", "propertyType": "msg", "rules": [ { "t": "true" }, { "t": "false" } ], "checkall": "true", "repair": false, "outputs": 2, "x": 350, "y": 740, "wires": [ [ "8bb186b210998b1b" ], [ "ae950e9992906e3b" ] ] }, { "id": "1d7febeaa33334d8", "type": "http request", "z": "9fae6a4f07359a53", "name": "Wake", "method": "POST", "ret": "txt", "paytoqs": "ignore", "url": "<your sisyphus IP>:3002/sisbot/wake_sisbot", "tls": "", "persist": false, "proxy": "", "insecureHTTPParser": false, "authType": "", "senderr": false, "headers": [], "x": 690, "y": 760, "wires": [ [ "92f657b08207954d" ] ] }, { "id": "8bb186b210998b1b", "type": "change", "z": "9fae6a4f07359a53", "name": "", "rules": [ { "t": "set", "p": "payload", "pt": "msg", "to": "{\"data\":{}}", "tot": "jsonata" }, { "t": "move", "p": "payload", "pt": "msg", "to": "payload.data", "tot": "msg" } ], "action": "", "property": "", "from": "", "to": "", "reg": false, "x": 530, "y": 720, "wires": [ [ "a08c778833c866a8" ] ] }, { "id": "ae950e9992906e3b", "type": "change", "z": "9fae6a4f07359a53", "name": "", "rules": [ { "t": "set", "p": "payload", "pt": "msg", "to": "{\"data\":{}}", "tot": "jsonata" }, { "t": "move", "p": "payload", "pt": "msg", "to": "payload.data", "tot": "msg" } ], "action": "", "property": "", "from": "", "to": "", "reg": false, "x": 530, "y": 760, "wires": [ [ "1d7febeaa33334d8" ] ] }, { "id": "7f4956edc8867b95", "type": "change", "z": "9fae6a4f07359a53", "name": "Sleeping?", "rules": [ { "t": "set", "p": "payload", "pt": "msg", "to": "payload.resp[0].is_sleeping", "tot": "msg" }, { "t": "set", "p": "payload", "pt": "msg", "to": "$boolean(payload=\"true\")", "tot": "jsonata" } ], "action": "", "property": "", "from": "", "to": "", "reg": false, "x": 980, "y": 60, "wires": [ [ "580b3e169655659f", "12d3c0aafa98ed16" ] ] }, { "id": "a15ad883eefaadd1", "type": "ui_slider", "z": "9fae6a4f07359a53", "name": "", "label": "Speed", "tooltip": "", "group": "6554eaffa3deadf7", "order": 0, "width": 0, "height": 0, "passthru": false, "outs": "end", "topic": "topic", "topicType": "msg", "min": 0, "max": "100", "step": "5", "className": "", "x": 190, "y": 880, "wires": [ [ "4c05864808a3bc6d" ] ] }, { "id": "4c05864808a3bc6d", "type": "change", "z": "9fae6a4f07359a53", "name": "", "rules": [ { "t": "set", "p": "payload", "pt": "msg", "to": "{\"data\":{\"value\": payload / 100 }}", "tot": "jsonata" }, { "t": "move", "p": "payload", "pt": "msg", "to": "payload.data", "tot": "msg" } ], "action": "", "property": "", "from": "", "to": "", "reg": false, "x": 370, "y": 880, "wires": [ [ "caef962c763c04c3" ] ] }, { "id": "caef962c763c04c3", "type": "http request", "z": "9fae6a4f07359a53", "name": "Speed", "method": "POST", "ret": "txt", "paytoqs": "ignore", "url": "<your sisyphus IP>:3002/sisbot/set_speed", "tls": "", "persist": false, "proxy": "", "insecureHTTPParser": false, "authType": "", "senderr": false, "headers": [], "x": 650, "y": 880, "wires": [ [ "79ae20d6129a2c45" ] ] }, { "id": "4fa0f7929fdf5ddf", "type": "change", "z": "9fae6a4f07359a53", "name": "Speed?", "rules": [ { "t": "set", "p": "payload", "pt": "msg", "to": "payload.resp[0].speed", "tot": "msg" }, { "t": "set", "p": "payload", "pt": "msg", "to": "$number(payload * 100)", "tot": "jsonata" } ], "action": "", "property": "", "from": "", "to": "", "reg": false, "x": 980, "y": 300, "wires": [ [ "5285e529645679cf", "d0d6e0221218181e" ] ] }, { "id": "580b3e169655659f", "type": "change", "z": "9fae6a4f07359a53", "name": "Context: Sleeping", "rules": [ { "t": "set", "p": "Sleeping", "pt": "flow", "to": "payload", "tot": "msg" } ], "action": "", "property": "", "from": "", "to": "", "reg": false, "x": 1630, "y": 60, "wires": [ [] ] }, { "id": "220b9afe727d6406", "type": "change", "z": "9fae6a4f07359a53", "name": "Context: Playing", "rules": [ { "t": "set", "p": "Playing", "pt": "flow", "to": "payload", "tot": "msg" } ], "action": "", "property": "", "from": "", "to": "", "reg": false, "x": 1620, "y": 140, "wires": [ [] ] }, { "id": "de60c524a09d4ed9", "type": "change", "z": "9fae6a4f07359a53", "name": "Context: Brightness", "rules": [ { "t": "set", "p": "Brightness", "pt": "flow", "to": "payload", "tot": "msg" } ], "action": "", "property": "", "from": "", "to": "", "reg": false, "x": 1640, "y": 220, "wires": [ [] ] }, { "id": "5285e529645679cf", "type": "change", "z": "9fae6a4f07359a53", "name": "Context: Speed", "rules": [ { "t": "set", "p": "Speed", "pt": "flow", "to": "payload", "tot": "msg" } ], "action": "", "property": "", "from": "", "to": "", "reg": false, "x": 1620, "y": 300, "wires": [ [] ] }, { "id": "6b0dd9ecaa2e6638", "type": "json", "z": "9fae6a4f07359a53", "name": "", "property": "payload", "action": "", "pretty": false, "x": 830, "y": 520, "wires": [ [ "907d14755a4e2b83" ] ] }, { "id": "7194fd74f010df06", "type": "json", "z": "9fae6a4f07359a53", "name": "", "property": "payload", "action": "", "pretty": false, "x": 830, "y": 580, "wires": [ [ "907d14755a4e2b83" ] ] }, { "id": "cda674dd875afcac", "type": "json", "z": "9fae6a4f07359a53", "name": "", "property": "payload", "action": "", "pretty": false, "x": 830, "y": 700, "wires": [ [ "496506aff8f78d7a" ] ] }, { "id": "92f657b08207954d", "type": "json", "z": "9fae6a4f07359a53", "name": "", "property": "payload", "action": "", "pretty": false, "x": 830, "y": 760, "wires": [ [ "496506aff8f78d7a" ] ] }, { "id": "79ae20d6129a2c45", "type": "json", "z": "9fae6a4f07359a53", "name": "", "property": "payload", "action": "", "pretty": false, "x": 830, "y": 880, "wires": [ [ "15ea002c5786ea5b" ] ] }, { "id": "594eee43c3eab60c", "type": "change", "z": "9fae6a4f07359a53", "name": "", "rules": [ { "t": "move", "p": "payload.resp[0].state", "pt": "msg", "to": "payload", "tot": "msg" }, { "t": "set", "p": "payload", "pt": "msg", "to": "$boolean(payload=\"playing\")", "tot": "jsonata" } ], "action": "", "property": "", "from": "", "to": "", "reg": false, "x": 1170, "y": 500, "wires": [ [ "859f5f1de2609321" ] ] }, { "id": "907d14755a4e2b83", "type": "switch", "z": "9fae6a4f07359a53", "name": "", "property": "payload.resp", "propertyType": "msg", "rules": [ { "t": "istype", "v": "array", "vt": "array" }, { "t": "istype", "v": "object", "vt": "object" } ], "checkall": "true", "repair": false, "outputs": 2, "x": 970, "y": 520, "wires": [ [ "594eee43c3eab60c" ], [ "97facbf16990ec80" ] ], "outputLabels": [ "Array", "Object" ] }, { "id": "97facbf16990ec80", "type": "change", "z": "9fae6a4f07359a53", "name": "", "rules": [ { "t": "move", "p": "payload.resp.state", "pt": "msg", "to": "payload", "tot": "msg" }, { "t": "set", "p": "payload", "pt": "msg", "to": "$boolean(payload=\"playing\")", "tot": "jsonata" } ], "action": "", "property": "", "from": "", "to": "", "reg": false, "x": 1170, "y": 540, "wires": [ [ "859f5f1de2609321" ] ] }, { "id": "859f5f1de2609321", "type": "switch", "z": "9fae6a4f07359a53", "name": "", "property": "payload", "propertyType": "msg", "rules": [ { "t": "neq", "v": "Playing", "vt": "flow" }, { "t": "else" } ], "checkall": "true", "repair": false, "outputs": 2, "x": 1370, "y": 520, "wires": [ [ "a73e29bd6ee47346", "220b9afe727d6406" ], [] ] }, { "id": "a73e29bd6ee47346", "type": "link out", "z": "9fae6a4f07359a53", "name": "Playing", "mode": "link", "links": [ "12a89f7554683b42" ], "x": 1465, "y": 520, "wires": [] }, { "id": "12a89f7554683b42", "type": "link in", "z": "9fae6a4f07359a53", "name": "link in 1", "links": [ "a73e29bd6ee47346", "6d7b734893d635eb" ], "x": 45, "y": 560, "wires": [ [ "9075a0b57341fafe", "013ed6cf796b5671" ] ] }, { "id": "c2b55d5f0d228713", "type": "change", "z": "9fae6a4f07359a53", "name": "", "rules": [ { "t": "move", "p": "payload.resp[0].is_sleeping", "pt": "msg", "to": "payload", "tot": "msg" }, { "t": "set", "p": "payload", "pt": "msg", "to": "$boolean(payload=\"true\")", "tot": "jsonata" } ], "action": "", "property": "", "from": "", "to": "", "reg": false, "x": 1170, "y": 700, "wires": [ [ "cbc71c17cf020eec" ] ] }, { "id": "496506aff8f78d7a", "type": "switch", "z": "9fae6a4f07359a53", "name": "", "property": "payload.resp", "propertyType": "msg", "rules": [ { "t": "istype", "v": "array", "vt": "array" }, { "t": "istype", "v": "object", "vt": "object" } ], "checkall": "true", "repair": false, "outputs": 2, "x": 970, "y": 720, "wires": [ [ "c2b55d5f0d228713" ], [ "d42f3f175da994bc" ] ], "outputLabels": [ "Array", "Object" ] }, { "id": "d42f3f175da994bc", "type": "change", "z": "9fae6a4f07359a53", "name": "", "rules": [ { "t": "move", "p": "payload.resp.is_sleeping", "pt": "msg", "to": "payload", "tot": "msg" }, { "t": "set", "p": "payload", "pt": "msg", "to": "$boolean(payload=\"true\")", "tot": "jsonata" } ], "action": "", "property": "", "from": "", "to": "", "reg": false, "x": 1170, "y": 740, "wires": [ [ "cbc71c17cf020eec" ] ] }, { "id": "cbc71c17cf020eec", "type": "switch", "z": "9fae6a4f07359a53", "name": "", "property": "payload", "propertyType": "msg", "rules": [ { "t": "neq", "v": "Sleeping", "vt": "flow" }, { "t": "else" } ], "checkall": "true", "repair": false, "outputs": 2, "x": 1370, "y": 720, "wires": [ [ "330192bde4a80dbc", "580b3e169655659f" ], [] ] }, { "id": "330192bde4a80dbc", "type": "link out", "z": "9fae6a4f07359a53", "name": "link out 1", "mode": "link", "links": [ "af6ade35725d93ac" ], "x": 1495, "y": 700, "wires": [] }, { "id": "af6ade35725d93ac", "type": "link in", "z": "9fae6a4f07359a53", "name": "link in 2", "links": [ "330192bde4a80dbc", "12d3c0aafa98ed16" ], "x": 45, "y": 740, "wires": [ [ "49d0ad8faaf2927e", "d590150140f5f727" ] ] }, { "id": "15ea002c5786ea5b", "type": "change", "z": "9fae6a4f07359a53", "name": "", "rules": [ { "t": "move", "p": "payload.resp.speed", "pt": "msg", "to": "payload", "tot": "msg" }, { "t": "set", "p": "payload", "pt": "msg", "to": "$number(payload * 100)", "tot": "jsonata" } ], "action": "", "property": "", "from": "", "to": "", "reg": false, "x": 1010, "y": 880, "wires": [ [ "bfd0182b2ef26408" ] ] }, { "id": "bfd0182b2ef26408", "type": "switch", "z": "9fae6a4f07359a53", "name": "", "property": "payload", "propertyType": "msg", "rules": [ { "t": "neq", "v": "Speed", "vt": "flow" }, { "t": "else" } ], "checkall": "true", "repair": false, "outputs": 2, "x": 1190, "y": 880, "wires": [ [ "5285e529645679cf", "886a012c9c234912" ], [] ] }, { "id": "886a012c9c234912", "type": "link out", "z": "9fae6a4f07359a53", "name": "link out 2", "mode": "link", "links": [ "2fe116c6b58e03a8" ], "x": 1295, "y": 900, "wires": [] }, { "id": "2fe116c6b58e03a8", "type": "link in", "z": "9fae6a4f07359a53", "name": "link in 3", "links": [ "886a012c9c234912", "d0d6e0221218181e" ], "x": 45, "y": 880, "wires": [ [ "a15ad883eefaadd1", "289f7b79dd7ea6ac" ] ] }, { "id": "c2e66511672b15ad", "type": "change", "z": "9fae6a4f07359a53", "name": "", "rules": [ { "t": "move", "p": "payload.resp.brightness", "pt": "msg", "to": "payload", "tot": "msg" }, { "t": "set", "p": "payload", "pt": "msg", "to": "$number(payload * 100)", "tot": "jsonata" } ], "action": "", "property": "", "from": "", "to": "", "reg": false, "x": 1010, "y": 380, "wires": [ [ "b727ec1519b5a181" ] ] }, { "id": "b727ec1519b5a181", "type": "switch", "z": "9fae6a4f07359a53", "name": "", "property": "payload", "propertyType": "msg", "rules": [ { "t": "neq", "v": "Brightness", "vt": "flow" }, { "t": "else" } ], "checkall": "true", "repair": false, "outputs": 2, "x": 1190, "y": 380, "wires": [ [ "de60c524a09d4ed9", "579d6da71f12fe9c" ], [] ] }, { "id": "579d6da71f12fe9c", "type": "link out", "z": "9fae6a4f07359a53", "name": "link out 3", "mode": "link", "links": [ "4f409a4348c3336c" ], "x": 1285, "y": 400, "wires": [] }, { "id": "4f409a4348c3336c", "type": "link in", "z": "9fae6a4f07359a53", "name": "link in 4", "links": [ "579d6da71f12fe9c", "d775e7cc56dbeac6" ], "x": 45, "y": 420, "wires": [ [ "af36a800b4bc3cf9", "255652d54d50cada" ] ] }, { "id": "12d3c0aafa98ed16", "type": "link out", "z": "9fae6a4f07359a53", "name": "link out 4", "mode": "link", "links": [ "af6ade35725d93ac" ], "x": 1215, "y": 80, "wires": [] }, { "id": "6d7b734893d635eb", "type": "link out", "z": "9fae6a4f07359a53", "name": "link out 5", "mode": "link", "links": [ "12a89f7554683b42" ], "x": 1215, "y": 160, "wires": [] }, { "id": "d775e7cc56dbeac6", "type": "link out", "z": "9fae6a4f07359a53", "name": "link out 6", "mode": "link", "links": [ "4f409a4348c3336c" ], "x": 1215, "y": 240, "wires": [] }, { "id": "d0d6e0221218181e", "type": "link out", "z": "9fae6a4f07359a53", "name": "link out 7", "mode": "link", "links": [ "2fe116c6b58e03a8" ], "x": 1215, "y": 320, "wires": [] }, { "id": "a21293aba52b197e", "type": "homekit-service", "z": "9fae6a4f07359a53", "isParent": true, "hostType": "0", "bridge": "9ecbb87f3de9fb1b", "accessoryId": "", "parentService": "", "name": "Sisiphus Licht", "serviceName": "Lightbulb", "topic": "", "filter": false, "manufacturer": "NRCHKB", "model": "1.6.1", "serialNo": "Default Serial Number", "firmwareRev": "1.6.1", "hardwareRev": "1.6.1", "softwareRev": "1.6.1", "cameraConfigVideoProcessor": "ffmpeg", "cameraConfigSource": "", "cameraConfigStillImageSource": "", "cameraConfigMaxStreams": 2, "cameraConfigMaxWidth": 1280, "cameraConfigMaxHeight": 720, "cameraConfigMaxFPS": 10, "cameraConfigMaxBitrate": 300, "cameraConfigVideoCodec": "libx264", "cameraConfigAudioCodec": "libfdk_aac", "cameraConfigAudio": false, "cameraConfigPacketSize": 1316, "cameraConfigVerticalFlip": false, "cameraConfigHorizontalFlip": false, "cameraConfigMapVideo": "0:0", "cameraConfigMapAudio": "0:1", "cameraConfigVideoFilter": "scale=1280:720", "cameraConfigAdditionalCommandLine": "-tune zerolatency", "cameraConfigDebug": false, "cameraConfigSnapshotOutput": "disabled", "cameraConfigInterfaceName": "", "characteristicProperties": "{\"Brightness\":true}", "waitForSetupMsg": false, "outputs": 2, "x": 360, "y": 360, "wires": [ [ "e21fe521a2a12d15" ], [] ] }, { "id": "255652d54d50cada", "type": "function", "z": "9fae6a4f07359a53", "name": "Convert2input", "func": "var input = msg.payload;\nif (input < 101) {\n if (input < 1) {\n msg.payload = {\n \"On\": false\n }\n }\n else {\n msg.payload = {\n \"Brightness\": input,\n \"On\": true\n }\n }\n return msg;\n}", "outputs": 1, "timeout": 0, "noerr": 0, "initialize": "", "finalize": "", "libs": [], "x": 180, "y": 360, "wires": [ [ "a21293aba52b197e" ] ] }, { "id": "e21fe521a2a12d15", "type": "function", "z": "9fae6a4f07359a53", "name": "Convert2Value", "func": "var b = context.get('b') || 0;\nif (msg.payload.Brightness) {\n b = msg.payload.Brightness;\n context.set('b', b);\n msg.payload = b\n}\n\n// Uncomment lines 9 and 20 to prevent looping\nif (msg.hap.context !== undefined) {\n if (msg.payload.Brightness === 0) {\n msg.payload = 0\n }\n if (msg.payload.On === false) {\n msg.payload = 0\n }\n if (msg.payload.On === true) {\n msg.payload = b\n }\n return msg\n}", "outputs": 1, "timeout": 0, "noerr": 0, "initialize": "", "finalize": "", "libs": [], "x": 560, "y": 360, "wires": [ [ "40a03d00d8309ebb" ] ] }, { "id": "923f9781e64eae44", "type": "homekit-service", "z": "9fae6a4f07359a53", "isParent": true, "hostType": "0", "bridge": "9ecbb87f3de9fb1b", "accessoryId": "", "parentService": "", "name": "Sisiphus Geschwindigkeit", "serviceName": "Lightbulb", "topic": "", "filter": false, "manufacturer": "NRCHKB", "model": "1.6.1", "serialNo": "Default Serial Number", "firmwareRev": "1.6.1", "hardwareRev": "1.6.1", "softwareRev": "1.6.1", "cameraConfigVideoProcessor": "ffmpeg", "cameraConfigSource": "", "cameraConfigStillImageSource": "", "cameraConfigMaxStreams": 2, "cameraConfigMaxWidth": 1280, "cameraConfigMaxHeight": 720, "cameraConfigMaxFPS": 10, "cameraConfigMaxBitrate": 300, "cameraConfigVideoCodec": "libx264", "cameraConfigAudioCodec": "libfdk_aac", "cameraConfigAudio": false, "cameraConfigPacketSize": 1316, "cameraConfigVerticalFlip": false, "cameraConfigHorizontalFlip": false, "cameraConfigMapVideo": "0:0", "cameraConfigMapAudio": "0:1", "cameraConfigVideoFilter": "scale=1280:720", "cameraConfigAdditionalCommandLine": "-tune zerolatency", "cameraConfigDebug": false, "cameraConfigSnapshotOutput": "disabled", "cameraConfigInterfaceName": "", "characteristicProperties": "{\"Brightness\":true}", "waitForSetupMsg": false, "outputs": 2, "x": 390, "y": 820, "wires": [ [ "b15034ee034d525c" ], [] ] }, { "id": "289f7b79dd7ea6ac", "type": "function", "z": "9fae6a4f07359a53", "name": "Convert2input", "func": "var input = msg.payload;\nif (input < 101) {\n if (input < 1) {\n msg.payload = {\n \"On\": false\n }\n }\n else {\n msg.payload = {\n \"Brightness\": input,\n \"On\": true\n }\n }\n return msg;\n}", "outputs": 1, "timeout": 0, "noerr": 0, "initialize": "", "finalize": "", "libs": [], "x": 180, "y": 820, "wires": [ [ "923f9781e64eae44" ] ] }, { "id": "b15034ee034d525c", "type": "function", "z": "9fae6a4f07359a53", "name": "Convert2Value", "func": "var s = context.get('s') || 0;\nif (msg.payload.Brightness) {\n s = msg.payload.Brightness;\n context.set('s', s);\n msg.payload = s\n}\n\n// Uncomment lines 9 and 20 to prevent looping\nif (msg.hap.context !== undefined) {\n if (msg.payload.Brightness === 0) {\n msg.payload = 0\n }\n if (msg.payload.On === false) {\n msg.payload = 0\n }\n if (msg.payload.On === true) {\n msg.payload = s\n }\n return msg\n}", "outputs": 1, "timeout": 0, "noerr": 0, "initialize": "", "finalize": "", "libs": [], "x": 600, "y": 820, "wires": [ [ "4c05864808a3bc6d" ] ] }, { "id": "dd717e5993d34154", "type": "homekit-service", "z": "9fae6a4f07359a53", "isParent": true, "hostType": "0", "bridge": "9ecbb87f3de9fb1b", "accessoryId": "", "parentService": "", "name": "Sisiphus Bewegung", "serviceName": "Switch", "topic": "", "filter": false, "manufacturer": "NRCHKB", "model": "1.6.1", "serialNo": "Default Serial Number", "firmwareRev": "1.6.1", "hardwareRev": "1.6.1", "softwareRev": "1.6.1", "cameraConfigVideoProcessor": "ffmpeg", "cameraConfigSource": "", "cameraConfigStillImageSource": "", "cameraConfigMaxStreams": 2, "cameraConfigMaxWidth": 1280, "cameraConfigMaxHeight": 720, "cameraConfigMaxFPS": 10, "cameraConfigMaxBitrate": 300, "cameraConfigVideoCodec": "libx264", "cameraConfigAudioCodec": "libfdk_aac", "cameraConfigAudio": false, "cameraConfigPacketSize": 1316, "cameraConfigVerticalFlip": false, "cameraConfigHorizontalFlip": false, "cameraConfigMapVideo": "0:0", "cameraConfigMapAudio": "0:1", "cameraConfigVideoFilter": "scale=1280:720", "cameraConfigAdditionalCommandLine": "-tune zerolatency", "cameraConfigDebug": false, "cameraConfigSnapshotOutput": "disabled", "cameraConfigInterfaceName": "", "characteristicProperties": "{}", "waitForSetupMsg": false, "outputs": 2, "x": 360, "y": 480, "wires": [ [ "62d102a56184237f" ], [] ] }, { "id": "013ed6cf796b5671", "type": "function", "z": "9fae6a4f07359a53", "name": "Convert2input", "func": " var newMsg = {\n \"payload\": {\n \"On\": msg.payload\n }\n }\nreturn newMsg;", "outputs": 1, "timeout": 0, "noerr": 0, "initialize": "", "finalize": "", "libs": [], "x": 160, "y": 480, "wires": [ [ "dd717e5993d34154" ] ] }, { "id": "62d102a56184237f", "type": "change", "z": "9fae6a4f07359a53", "name": "", "rules": [ { "t": "set", "p": "payload", "pt": "msg", "to": "payload.On", "tot": "msg" } ], "action": "", "property": "", "from": "", "to": "", "reg": false, "x": 570, "y": 460, "wires": [ [ "9b345ce68657d103" ] ] }, { "id": "d590150140f5f727", "type": "function", "z": "9fae6a4f07359a53", "name": "Convert2input", "func": " var newMsg = {\n \"payload\": {\n \"On\": msg.payload\n }\n }\nreturn newMsg;", "outputs": 1, "timeout": 0, "noerr": 0, "initialize": "", "finalize": "", "libs": [], "x": 160, "y": 660, "wires": [ [ "4aa20118044ebd5c" ] ] }, { "id": "4aa20118044ebd5c", "type": "homekit-service", "z": "9fae6a4f07359a53", "isParent": true, "hostType": "0", "bridge": "9ecbb87f3de9fb1b", "accessoryId": "", "parentService": "", "name": "Sisiphus Schlafen", "serviceName": "Switch", "topic": "", "filter": false, "manufacturer": "NRCHKB", "model": "1.6.1", "serialNo": "Default Serial Number", "firmwareRev": "1.6.1", "hardwareRev": "1.6.1", "softwareRev": "1.6.1", "cameraConfigVideoProcessor": "ffmpeg", "cameraConfigSource": "", "cameraConfigStillImageSource": "", "cameraConfigMaxStreams": 2, "cameraConfigMaxWidth": 1280, "cameraConfigMaxHeight": 720, "cameraConfigMaxFPS": 10, "cameraConfigMaxBitrate": 300, "cameraConfigVideoCodec": "libx264", "cameraConfigAudioCodec": "libfdk_aac", "cameraConfigAudio": false, "cameraConfigPacketSize": 1316, "cameraConfigVerticalFlip": false, "cameraConfigHorizontalFlip": false, "cameraConfigMapVideo": "0:0", "cameraConfigMapAudio": "0:1", "cameraConfigVideoFilter": "scale=1280:720", "cameraConfigAdditionalCommandLine": "-tune zerolatency", "cameraConfigDebug": false, "cameraConfigSnapshotOutput": "disabled", "cameraConfigInterfaceName": "", "characteristicProperties": "{}", "waitForSetupMsg": false, "outputs": 2, "x": 350, "y": 660, "wires": [ [ "86f316975b609b6f" ], [] ] }, { "id": "86f316975b609b6f", "type": "change", "z": "9fae6a4f07359a53", "name": "", "rules": [ { "t": "set", "p": "payload", "pt": "msg", "to": "payload.On", "tot": "msg" } ], "action": "", "property": "", "from": "", "to": "", "reg": false, "x": 570, "y": 640, "wires": [ [ "14949e5be26a1b5a" ] ] }, { "id": "6554eaffa3deadf7", "type": "ui_group", "name": "Steuerung", "tab": "92d95ee4c013a822", "order": 1, "disp": true, "width": "6", "collapse": false, "className": "" }, { "id": "9ecbb87f3de9fb1b", "type": "homekit-bridge", "bridgeName": "NodeRedBridgeAdapter", "pinCode": "4813-2314", "port": "", "advertiser": "bonjour-hap", "allowInsecureRequest": false, "manufacturer": "NRCHKB", "model": "1.6.1", "serialNo": "Default Serial Number", "firmwareRev": "1.6.1", "hardwareRev": "1.6.1", "softwareRev": "1.6.1", "customMdnsConfig": false, "mdnsMulticast": true, "mdnsInterface": "", "mdnsPort": "", "mdnsIp": "", "mdnsTtl": "", "mdnsLoopback": true, "mdnsReuseAddr": true, "allowMessagePassthrough": true }, { "id": "92d95ee4c013a822", "type": "ui_tab", "name": "Sisyphus", "icon": "dashboard", "disabled": false, "hidden": false } ] Attachment : sisy-1.jpeg

Incase anyone happens upon this post and WAnts to know about resolution: After some back and forth pictures and diagnostics with Bruce, The issue WAs identified and the errant part is being replaced; Bruce / Sisyphus Industries is sending the replacement direct to me in NZ. so I would like to record full satisfaction of the Service supplied so far and appreciate that the team is standing by their product and providing excellent Service. Thanks guys.

... customer Service or some direction. I WAs able to in the past but that seems to have changed. Please help me get to the current firmware. Also, due to the corrupt file, I do not know the "current" firmware that WAs/is in the corrupt card. Not sure if Siyphus has any issues with large jumps in firmware, please let me know if I need to update prior firmwares first before the most current. Not sure if that is an issue in your company. 🙂 Thank you. Suzanne

... coming up, I designed a 3D-printable clip to hold aftermarket bumpers in place along the rim. I'm using the "50 pcs 8.5mm X 2.5mm special shape" bumpers from this $9 318 piece set. These bumpers are $9 for 50 ($0.17 each, or $0.03 each if you include the value of the other bumpers included). It takes about 18 minutes to print 6 of them on my printer. I printed them in black PLA-CF. They will be a little tight when you re-insert the wood ring. I WAs just able to press-fit them with the thinner side between the inner surface of the rim and the wood ring. I ...

To do it locally (just on your computer and Sis): Create your track in Sandify. Under "Machine" tab, choose Polar, and the start and endpoint (must be center or perimeter). Hit the Export button - choose Theta Rho format, give it a name, don't add start or end code - hit download. Connect the computer you downloaded the track to, to your Sis using a web browser. From the Sis app running on your browser, go to Settings / Advanced / Upload file(s). Upload file to your table, and be sure to hit "save" once you see the thumbnail of the track show up. To share a track publicly on our "Community" repo - create an account on Webcenter. From there you can upload your tracks, choose whether each is public or not. All public tracks are vetted by our staff to assure they do not violate our terms of Service (nothing overtly offensive, etc...). Once approved, shared tracks will be available using the Community tab on our app.

@robotmastern - The problem is almost certainly because you're on a very old version of the firmware (current is 1.10.83). Try updating (settings>advanced>firmware update). If it doesn't properly update, please contact our Service desk and they'll arrange a fix.

Nice track! The WAy you share (or just store) the tracks you create is in on WebCenter - . Create an account (it is not the same as the account you have on our web site). You can then upload as many tracks as you like. You have complete control over whether you make a track public or not. If you share it, the content goes through a quick approval (just a check to make sure it does not conflict with our terms of Service - things like hate speech, obscenity, etc.), and then is made available for others on our Community.

Hi. Just bought and installed the table. Looks and works great. However - when the table is plugged in - the entire home wifi has major issues (slow to no connectivity with iMacs, iPhones, etc). Current home setup: Arris SB8200 Router Comcast/Xfinity internet Service 1GB per second Eero home wifi pods plugged into entire home Since the home wifi starts to crash when I use the table - I had to unplug the table - and reset the router.. Everything works like it should but whenever I plug in the sisyphus table - the home wifi starts to crash again. PLEASE HELP!!!!

... ]); - file:///private/var/containers/Bundle/Application/273348F3-920B-494F-8467-0206D54E5255/Sisyphus.app/www/plugins/cordova-plugin-wkwebview-engine/src/www/ios/ios-wkwebview-exec.js - 104" This error does not prevent me from downloading new tracks 100% of the time. Around every 10 to 15 tries I will hit this error message, but the track also successfully downloads. Most of the time when I see this error, the track does not download successfully. Either WAy, this error has effectively halted my ability to download new tracks. I am using firmware version ...

I have a variation of this problem -- but appears to be stuck in a cycle that repeats endlessly every 2 min. Brand new table, just unboxed, happens upon startup. I sent in a Service request, but WAnted to also post here in case anyone else has seen this and has a fix / suggestions. I've been through the support posts on table clicking -- arm and slide seem fine and are moving smoothly. More info below if you'd like to read on... (submitted to Sisyphus support June 12, 6:40 PM Hi gang. WAs very excited to receive my metal coffee table today. Unp ...

Hi Ben, Sorry to hear your new table isn't working properly. It sounds like there is a problem with the home sensor (when the table boots up, the first thing it does is find "home" - first the rotation axis, then the linear). Since you can see the arm rotating, the motor is working - but the sensor is not responding when a tiny "target magnet" passes by it. Try this: Unplug the table. Look under and find the "SisBotBoard" (square circuit board). Check the connectors attached to it by tugging gently - especially the ones with 2 white and 1 black wire (these go to the Theta and Rho sensors). Even if they're not loose, reseat them by depressing the tiny plastic latch and pulling. Then reconnect by pushing in until you hear / feel a click. Neither pulling out or pushing in should require much force. Then try repowering the table. Fingers crossed... Bruce ps- if this doesn't work, follow the 3-wire cables to the two sensors and see if there is anything obvious (they should be firmly glued in place on the plate that holds the motors). Please contact our Service desk if these directions don't work).

Hey Jessica - sorry- I missed your prior post. This sounds like a problem with Bonjour (a Service Apple created that converts alias names to their local IP address). I've alerted our devs and we're trying to figure out a WAy to make it more robust. I the mean time, using the IP address will work (which you've figured out). Bruce

Hi, I love my 36" coffee table. A while back I upgraded the lights with RGBW NeoPixels and an Arduino and it WAs even more amazing. I WAs happy when the retrofit kits came out, so I ordered one. A customer Service rep WAs kind enough to discount the kit by leaving the LEDs out (since I already had that) so I only upgraded with the light control board. The NeoPixels work perfectly with the Sisyphus control board, but unfortunately I must have gotten something mixed up when I originally swapped out the lights - colors modes with a rho follow are inverted! If ...

Your experience sounds very similar to mine, which you can read about in this thread: I believe the responsibility is on FedEx to use proper handling procedures. A shipment that weighs nearly 100 pounds and has a label on it that says two people are needed to lift it, should not be carted over uneven pavement by a single employee and rolled corner over corner, which is what happened to me. FedEx is being paid for this Service and such practices, in my opinion, are not compliant. That said, modification to the package design could help reduce problems caused by rough handling. I suspect that the cardboard insert placed underneath the table could push against the metal support arms that hold the Sisbot, if the side of the box were pressed in. If this insert were altered (for example, modifying the profile so that part of it sits under the outer edge of the table), then it would provide more resistance to being pushed into these supports.

... finds your table, it will ask you to login - name: pi, Password: the PW I sent you. Notes: The default password for Raspberry Pi's is "raspberry". We changed it due to security concerns(we don't WAnt hackers messing with your table!). You can use your table's name (a.k.a. alias, like "sisyphus") as the hostname, but you have to add ".local" - e.g. Host: sisyphus.local. If that doesn't work, you can find the actual IP address by using either your phone app or browser interface / Settings / Advanced / IP address is displayed next to "Sisyphus IP Address". ...

#	Post Title	Result Info	Date	User	Forum
	Sisyphus homekit integration with node-red	8 Relevance	1 year ago	robin.glave	Other Development
	I used node-red running on a RasPi to connect my Sisyphus to HomeKit. I can see the tables state and change brightness and speed and send it into sleep mode. It's all mapped as "lights" in homekit, but it works, see picture. It uses the HomeKit-bridged-nodes (). Flows are pasted below (import to node red), you need to set the IP in every HTTP node to your table's local IP. ( replace all <your sisyphus IP> with e.g. 192.168.0.100) [ { "id": "9fae6a4f07359a53", "type": "tab", "label": "Sisi", "disabled": false, "info": "", "env": [] }, { "id": "73509f73e6f51240", "type": "http request", "z": "9fae6a4f07359a53", "name": "Status", "method": "POST", "ret": "txt", "paytoqs": "ignore", "url": "<your sisyphus IP>:3002/sisbot/state", "tls": "", "persist": false, "proxy": "", "insecureHTTPParser": false, "authType": "", "senderr": false, "headers": [], "x": 590, "y": 200, "wires": [ [ "e378416052644b5a" ] ] }, { "id": "41e11e07a32918a5", "type": "debug", "z": "9fae6a4f07359a53", "name": "Sisiphus", "active": false, "tosidebar": true, "console": false, "tostatus": false, "complete": "payload", "targetType": "msg", "statusVal": "", "statusType": "auto", "x": 780, "y": 300, "wires": [] }, { "id": "fc3777898e1070ac", "type": "inject", "z": "9fae6a4f07359a53", "name": "", "props": [ { "p": "payload" }, { "p": "topic", "vt": "str" } ], "repeat": "300", "crontab": "", "once": true, "onceDelay": "0.5", "topic": "", "payload": "", "payloadType": "date", "x": 410, "y": 200, "wires": [ [ "73509f73e6f51240" ] ] }, { "id": "e378416052644b5a", "type": "json", "z": "9fae6a4f07359a53", "name": "", "property": "payload", "action": "", "pretty": false, "x": 790, "y": 200, "wires": [ [ "41e11e07a32918a5", "39df053a83dd1fba", "a8f8972fcca98982", "7f4956edc8867b95", "4fa0f7929fdf5ddf" ] ] }, { "id": "9bc253a01a47fc47", "type": "http request", "z": "9fae6a4f07359a53", "name": "Brightness", "method": "POST", "ret": "txt", "paytoqs": "ignore", "url": "<your sisyphus IP>:3002/sisbot/set_brightness", "tls": "", "persist": false, "proxy": "", "insecureHTTPParser": false, "authType": "", "senderr": false, "headers": [], "x": 670, "y": 420, "wires": [ [ "38fa7a64f8e3342d" ] ] }, { "id": "38fa7a64f8e3342d", "type": "json", "z": "9fae6a4f07359a53", "name": "", "property": "payload", "action": "", "pretty": false, "x": 830, "y": 420, "wires": [ [ "c2e66511672b15ad" ] ] }, { "id": "af36a800b4bc3cf9", "type": "ui_slider", "z": "9fae6a4f07359a53", "name": "", "label": "Licht", "tooltip": "", "group": "6554eaffa3deadf7", "order": 0, "width": 0, "height": 0, "passthru": false, "outs": "end", "topic": "topic", "topicType": "msg", "min": 0, "max": "100", "step": "5", "className": "", "x": 170, "y": 420, "wires": [ [ "40a03d00d8309ebb" ] ] }, { "id": "40a03d00d8309ebb", "type": "change", "z": "9fae6a4f07359a53", "name": "", "rules": [ { "t": "set", "p": "payload", "pt": "msg", "to": "{\"data\":{\"value\": payload / 100 }}", "tot": "jsonata" }, { "t": "move", "p": "payload", "pt": "msg", "to": "payload.data", "tot": "msg" } ], "action": "", "property": "", "from": "", "to": "", "reg": false, "x": 350, "y": 420, "wires": [ [ "9bc253a01a47fc47" ] ] }, { "id": "39df053a83dd1fba", "type": "change", "z": "9fae6a4f07359a53", "name": "Brightness?", "rules": [ { "t": "set", "p": "payload", "pt": "msg", "to": "payload.resp[0].brightness", "tot": "msg" }, { "t": "set", "p": "payload", "pt": "msg", "to": "$number(payload * 100)", "tot": "jsonata" } ], "action": "", "property": "", "from": "", "to": "", "reg": false, "x": 990, "y": 220, "wires": [ [ "de60c524a09d4ed9", "d775e7cc56dbeac6" ] ] }, { "id": "63f2f9f64b897f20", "type": "http request", "z": "9fae6a4f07359a53", "name": "Play", "method": "POST", "ret": "txt", "paytoqs": "ignore", "url": "<your sisyphus IP>:3002/sisbot/play", "tls": "", "persist": false, "proxy": "", "insecureHTTPParser": false, "authType": "", "senderr": false, "headers": [], "x": 670, "y": 520, "wires": [ [ "6b0dd9ecaa2e6638" ] ] }, { "id": "9075a0b57341fafe", "type": "ui_switch", "z": "9fae6a4f07359a53", "name": "", "label": "Bewegung", "tooltip": "", "group": "6554eaffa3deadf7", "order": 1, "width": 0, "height": 0, "passthru": false, "decouple": "true", "topic": "topic", "topicType": "msg", "style": "", "onvalue": "true", "onvalueType": "bool", "onicon": "", "oncolor": "", "offvalue": "false", "offvalueType": "bool", "officon": "", "offcolor": "", "animate": false, "className": "", "x": 190, "y": 560, "wires": [ [ "9b345ce68657d103" ] ] }, { "id": "9b345ce68657d103", "type": "switch", "z": "9fae6a4f07359a53", "name": "", "property": "payload", "propertyType": "msg", "rules": [ { "t": "true" }, { "t": "false" } ], "checkall": "true", "repair": false, "outputs": 2, "x": 330, "y": 560, "wires": [ [ "c7ae165f5a97da02" ], [ "26d88f94f53e2873" ] ] }, { "id": "1cdd2ca370b02943", "type": "http request", "z": "9fae6a4f07359a53", "name": "Pause", "method": "POST", "ret": "txt", "paytoqs": "ignore", "url": "<your sisyphus IP>:3002/sisbot/pause", "tls": "", "persist": false, "proxy": "", "insecureHTTPParser": false, "authType": "", "senderr": false, "headers": [], "x": 670, "y": 580, "wires": [ [ "7194fd74f010df06" ] ] }, { "id": "c7ae165f5a97da02", "type": "change", "z": "9fae6a4f07359a53", "name": "", "rules": [ { "t": "set", "p": "payload", "pt": "msg", "to": "{\"data\":{}}", "tot": "jsonata" }, { "t": "move", "p": "payload", "pt": "msg", "to": "payload.data", "tot": "msg" } ], "action": "", "property": "", "from": "", "to": "", "reg": false, "x": 510, "y": 540, "wires": [ [ "63f2f9f64b897f20" ] ] }, { "id": "26d88f94f53e2873", "type": "change", "z": "9fae6a4f07359a53", "name": "", "rules": [ { "t": "set", "p": "payload", "pt": "msg", "to": "{\"data\":{}}", "tot": "jsonata" }, { "t": "move", "p": "payload", "pt": "msg", "to": "payload.data", "tot": "msg" } ], "action": "", "property": "", "from": "", "to": "", "reg": false, "x": 510, "y": 580, "wires": [ [ "1cdd2ca370b02943" ] ] }, { "id": "a8f8972fcca98982", "type": "change", "z": "9fae6a4f07359a53", "name": "Playing?", "rules": [ { "t": "set", "p": "payload", "pt": "msg", "to": "payload.resp[0].state", "tot": "msg" }, { "t": "set", "p": "payload", "pt": "msg", "to": "$boolean(payload=\"playing\")", "tot": "jsonata" } ], "action": "", "property": "", "from": "", "to": "", "reg": false, "x": 980, "y": 140, "wires": [ [ "220b9afe727d6406", "6d7b734893d635eb" ] ] }, { "id": "a08c778833c866a8", "type": "http request", "z": "9fae6a4f07359a53", "name": "Sleep", "method": "POST", "ret": "txt", "paytoqs": "ignore", "url": "<your sisyphus IP>:3002/sisbot/sleep_sisbot", "tls": "", "persist": false, "proxy": "", "insecureHTTPParser": false, "authType": "", "senderr": false, "headers": [], "x": 690, "y": 700, "wires": [ [ "cda674dd875afcac" ] ] }, { "id": "49d0ad8faaf2927e", "type": "ui_switch", "z": "9fae6a4f07359a53", "name": "", "label": "Schlafen", "tooltip": "", "group": "6554eaffa3deadf7", "order": 1, "width": 0, "height": 0, "passthru": false, "decouple": "true", "topic": "topic", "topicType": "msg", "style": "", "onvalue": "true", "onvalueType": "bool", "onicon": "", "oncolor": "", "offvalue": "false", "offvalueType": "bool", "officon": "", "offcolor": "", "animate": false, "className": "", "x": 200, "y": 740, "wires": [ [ "14949e5be26a1b5a" ] ] }, { "id": "14949e5be26a1b5a", "type": "switch", "z": "9fae6a4f07359a53", "name": "", "property": "payload", "propertyType": "msg", "rules": [ { "t": "true" }, { "t": "false" } ], "checkall": "true", "repair": false, "outputs": 2, "x": 350, "y": 740, "wires": [ [ "8bb186b210998b1b" ], [ "ae950e9992906e3b" ] ] }, { "id": "1d7febeaa33334d8", "type": "http request", "z": "9fae6a4f07359a53", "name": "Wake", "method": "POST", "ret": "txt", "paytoqs": "ignore", "url": "<your sisyphus IP>:3002/sisbot/wake_sisbot", "tls": "", "persist": false, "proxy": "", "insecureHTTPParser": false, "authType": "", "senderr": false, "headers": [], "x": 690, "y": 760, "wires": [ [ "92f657b08207954d" ] ] }, { "id": "8bb186b210998b1b", "type": "change", "z": "9fae6a4f07359a53", "name": "", "rules": [ { "t": "set", "p": "payload", "pt": "msg", "to": "{\"data\":{}}", "tot": "jsonata" }, { "t": "move", "p": "payload", "pt": "msg", "to": "payload.data", "tot": "msg" } ], "action": "", "property": "", "from": "", "to": "", "reg": false, "x": 530, "y": 720, "wires": [ [ "a08c778833c866a8" ] ] }, { "id": "ae950e9992906e3b", "type": "change", "z": "9fae6a4f07359a53", "name": "", "rules": [ { "t": "set", "p": "payload", "pt": "msg", "to": "{\"data\":{}}", "tot": "jsonata" }, { "t": "move", "p": "payload", "pt": "msg", "to": "payload.data", "tot": "msg" } ], "action": "", "property": "", "from": "", "to": "", "reg": false, "x": 530, "y": 760, "wires": [ [ "1d7febeaa33334d8" ] ] }, { "id": "7f4956edc8867b95", "type": "change", "z": "9fae6a4f07359a53", "name": "Sleeping?", "rules": [ { "t": "set", "p": "payload", "pt": "msg", "to": "payload.resp[0].is_sleeping", "tot": "msg" }, { "t": "set", "p": "payload", "pt": "msg", "to": "$boolean(payload=\"true\")", "tot": "jsonata" } ], "action": "", "property": "", "from": "", "to": "", "reg": false, "x": 980, "y": 60, "wires": [ [ "580b3e169655659f", "12d3c0aafa98ed16" ] ] }, { "id": "a15ad883eefaadd1", "type": "ui_slider", "z": "9fae6a4f07359a53", "name": "", "label": "Speed", "tooltip": "", "group": "6554eaffa3deadf7", "order": 0, "width": 0, "height": 0, "passthru": false, "outs": "end", "topic": "topic", "topicType": "msg", "min": 0, "max": "100", "step": "5", "className": "", "x": 190, "y": 880, "wires": [ [ "4c05864808a3bc6d" ] ] }, { "id": "4c05864808a3bc6d", "type": "change", "z": "9fae6a4f07359a53", "name": "", "rules": [ { "t": "set", "p": "payload", "pt": "msg", "to": "{\"data\":{\"value\": payload / 100 }}", "tot": "jsonata" }, { "t": "move", "p": "payload", "pt": "msg", "to": "payload.data", "tot": "msg" } ], "action": "", "property": "", "from": "", "to": "", "reg": false, "x": 370, "y": 880, "wires": [ [ "caef962c763c04c3" ] ] }, { "id": "caef962c763c04c3", "type": "http request", "z": "9fae6a4f07359a53", "name": "Speed", "method": "POST", "ret": "txt", "paytoqs": "ignore", "url": "<your sisyphus IP>:3002/sisbot/set_speed", "tls": "", "persist": false, "proxy": "", "insecureHTTPParser": false, "authType": "", "senderr": false, "headers": [], "x": 650, "y": 880, "wires": [ [ "79ae20d6129a2c45" ] ] }, { "id": "4fa0f7929fdf5ddf", "type": "change", "z": "9fae6a4f07359a53", "name": "Speed?", "rules": [ { "t": "set", "p": "payload", "pt": "msg", "to": "payload.resp[0].speed", "tot": "msg" }, { "t": "set", "p": "payload", "pt": "msg", "to": "$number(payload * 100)", "tot": "jsonata" } ], "action": "", "property": "", "from": "", "to": "", "reg": false, "x": 980, "y": 300, "wires": [ [ "5285e529645679cf", "d0d6e0221218181e" ] ] }, { "id": "580b3e169655659f", "type": "change", "z": "9fae6a4f07359a53", "name": "Context: Sleeping", "rules": [ { "t": "set", "p": "Sleeping", "pt": "flow", "to": "payload", "tot": "msg" } ], "action": "", "property": "", "from": "", "to": "", "reg": false, "x": 1630, "y": 60, "wires": [ [] ] }, { "id": "220b9afe727d6406", "type": "change", "z": "9fae6a4f07359a53", "name": "Context: Playing", "rules": [ { "t": "set", "p": "Playing", "pt": "flow", "to": "payload", "tot": "msg" } ], "action": "", "property": "", "from": "", "to": "", "reg": false, "x": 1620, "y": 140, "wires": [ [] ] }, { "id": "de60c524a09d4ed9", "type": "change", "z": "9fae6a4f07359a53", "name": "Context: Brightness", "rules": [ { "t": "set", "p": "Brightness", "pt": "flow", "to": "payload", "tot": "msg" } ], "action": "", "property": "", "from": "", "to": "", "reg": false, "x": 1640, "y": 220, "wires": [ [] ] }, { "id": "5285e529645679cf", "type": "change", "z": "9fae6a4f07359a53", "name": "Context: Speed", "rules": [ { "t": "set", "p": "Speed", "pt": "flow", "to": "payload", "tot": "msg" } ], "action": "", "property": "", "from": "", "to": "", "reg": false, "x": 1620, "y": 300, "wires": [ [] ] }, { "id": "6b0dd9ecaa2e6638", "type": "json", "z": "9fae6a4f07359a53", "name": "", "property": "payload", "action": "", "pretty": false, "x": 830, "y": 520, "wires": [ [ "907d14755a4e2b83" ] ] }, { "id": "7194fd74f010df06", "type": "json", "z": "9fae6a4f07359a53", "name": "", "property": "payload", "action": "", "pretty": false, "x": 830, "y": 580, "wires": [ [ "907d14755a4e2b83" ] ] }, { "id": "cda674dd875afcac", "type": "json", "z": "9fae6a4f07359a53", "name": "", "property": "payload", "action": "", "pretty": false, "x": 830, "y": 700, "wires": [ [ "496506aff8f78d7a" ] ] }, { "id": "92f657b08207954d", "type": "json", "z": "9fae6a4f07359a53", "name": "", "property": "payload", "action": "", "pretty": false, "x": 830, "y": 760, "wires": [ [ "496506aff8f78d7a" ] ] }, { "id": "79ae20d6129a2c45", "type": "json", "z": "9fae6a4f07359a53", "name": "", "property": "payload", "action": "", "pretty": false, "x": 830, "y": 880, "wires": [ [ "15ea002c5786ea5b" ] ] }, { "id": "594eee43c3eab60c", "type": "change", "z": "9fae6a4f07359a53", "name": "", "rules": [ { "t": "move", "p": "payload.resp[0].state", "pt": "msg", "to": "payload", "tot": "msg" }, { "t": "set", "p": "payload", "pt": "msg", "to": "$boolean(payload=\"playing\")", "tot": "jsonata" } ], "action": "", "property": "", "from": "", "to": "", "reg": false, "x": 1170, "y": 500, "wires": [ [ "859f5f1de2609321" ] ] }, { "id": "907d14755a4e2b83", "type": "switch", "z": "9fae6a4f07359a53", "name": "", "property": "payload.resp", "propertyType": "msg", "rules": [ { "t": "istype", "v": "array", "vt": "array" }, { "t": "istype", "v": "object", "vt": "object" } ], "checkall": "true", "repair": false, "outputs": 2, "x": 970, "y": 520, "wires": [ [ "594eee43c3eab60c" ], [ "97facbf16990ec80" ] ], "outputLabels": [ "Array", "Object" ] }, { "id": "97facbf16990ec80", "type": "change", "z": "9fae6a4f07359a53", "name": "", "rules": [ { "t": "move", "p": "payload.resp.state", "pt": "msg", "to": "payload", "tot": "msg" }, { "t": "set", "p": "payload", "pt": "msg", "to": "$boolean(payload=\"playing\")", "tot": "jsonata" } ], "action": "", "property": "", "from": "", "to": "", "reg": false, "x": 1170, "y": 540, "wires": [ [ "859f5f1de2609321" ] ] }, { "id": "859f5f1de2609321", "type": "switch", "z": "9fae6a4f07359a53", "name": "", "property": "payload", "propertyType": "msg", "rules": [ { "t": "neq", "v": "Playing", "vt": "flow" }, { "t": "else" } ], "checkall": "true", "repair": false, "outputs": 2, "x": 1370, "y": 520, "wires": [ [ "a73e29bd6ee47346", "220b9afe727d6406" ], [] ] }, { "id": "a73e29bd6ee47346", "type": "link out", "z": "9fae6a4f07359a53", "name": "Playing", "mode": "link", "links": [ "12a89f7554683b42" ], "x": 1465, "y": 520, "wires": [] }, { "id": "12a89f7554683b42", "type": "link in", "z": "9fae6a4f07359a53", "name": "link in 1", "links": [ "a73e29bd6ee47346", "6d7b734893d635eb" ], "x": 45, "y": 560, "wires": [ [ "9075a0b57341fafe", "013ed6cf796b5671" ] ] }, { "id": "c2b55d5f0d228713", "type": "change", "z": "9fae6a4f07359a53", "name": "", "rules": [ { "t": "move", "p": "payload.resp[0].is_sleeping", "pt": "msg", "to": "payload", "tot": "msg" }, { "t": "set", "p": "payload", "pt": "msg", "to": "$boolean(payload=\"true\")", "tot": "jsonata" } ], "action": "", "property": "", "from": "", "to": "", "reg": false, "x": 1170, "y": 700, "wires": [ [ "cbc71c17cf020eec" ] ] }, { "id": "496506aff8f78d7a", "type": "switch", "z": "9fae6a4f07359a53", "name": "", "property": "payload.resp", "propertyType": "msg", "rules": [ { "t": "istype", "v": "array", "vt": "array" }, { "t": "istype", "v": "object", "vt": "object" } ], "checkall": "true", "repair": false, "outputs": 2, "x": 970, "y": 720, "wires": [ [ "c2b55d5f0d228713" ], [ "d42f3f175da994bc" ] ], "outputLabels": [ "Array", "Object" ] }, { "id": "d42f3f175da994bc", "type": "change", "z": "9fae6a4f07359a53", "name": "", "rules": [ { "t": "move", "p": "payload.resp.is_sleeping", "pt": "msg", "to": "payload", "tot": "msg" }, { "t": "set", "p": "payload", "pt": "msg", "to": "$boolean(payload=\"true\")", "tot": "jsonata" } ], "action": "", "property": "", "from": "", "to": "", "reg": false, "x": 1170, "y": 740, "wires": [ [ "cbc71c17cf020eec" ] ] }, { "id": "cbc71c17cf020eec", "type": "switch", "z": "9fae6a4f07359a53", "name": "", "property": "payload", "propertyType": "msg", "rules": [ { "t": "neq", "v": "Sleeping", "vt": "flow" }, { "t": "else" } ], "checkall": "true", "repair": false, "outputs": 2, "x": 1370, "y": 720, "wires": [ [ "330192bde4a80dbc", "580b3e169655659f" ], [] ] }, { "id": "330192bde4a80dbc", "type": "link out", "z": "9fae6a4f07359a53", "name": "link out 1", "mode": "link", "links": [ "af6ade35725d93ac" ], "x": 1495, "y": 700, "wires": [] }, { "id": "af6ade35725d93ac", "type": "link in", "z": "9fae6a4f07359a53", "name": "link in 2", "links": [ "330192bde4a80dbc", "12d3c0aafa98ed16" ], "x": 45, "y": 740, "wires": [ [ "49d0ad8faaf2927e", "d590150140f5f727" ] ] }, { "id": "15ea002c5786ea5b", "type": "change", "z": "9fae6a4f07359a53", "name": "", "rules": [ { "t": "move", "p": "payload.resp.speed", "pt": "msg", "to": "payload", "tot": "msg" }, { "t": "set", "p": "payload", "pt": "msg", "to": "$number(payload * 100)", "tot": "jsonata" } ], "action": "", "property": "", "from": "", "to": "", "reg": false, "x": 1010, "y": 880, "wires": [ [ "bfd0182b2ef26408" ] ] }, { "id": "bfd0182b2ef26408", "type": "switch", "z": "9fae6a4f07359a53", "name": "", "property": "payload", "propertyType": "msg", "rules": [ { "t": "neq", "v": "Speed", "vt": "flow" }, { "t": "else" } ], "checkall": "true", "repair": false, "outputs": 2, "x": 1190, "y": 880, "wires": [ [ "5285e529645679cf", "886a012c9c234912" ], [] ] }, { "id": "886a012c9c234912", "type": "link out", "z": "9fae6a4f07359a53", "name": "link out 2", "mode": "link", "links": [ "2fe116c6b58e03a8" ], "x": 1295, "y": 900, "wires": [] }, { "id": "2fe116c6b58e03a8", "type": "link in", "z": "9fae6a4f07359a53", "name": "link in 3", "links": [ "886a012c9c234912", "d0d6e0221218181e" ], "x": 45, "y": 880, "wires": [ [ "a15ad883eefaadd1", "289f7b79dd7ea6ac" ] ] }, { "id": "c2e66511672b15ad", "type": "change", "z": "9fae6a4f07359a53", "name": "", "rules": [ { "t": "move", "p": "payload.resp.brightness", "pt": "msg", "to": "payload", "tot": "msg" }, { "t": "set", "p": "payload", "pt": "msg", "to": "$number(payload * 100)", "tot": "jsonata" } ], "action": "", "property": "", "from": "", "to": "", "reg": false, "x": 1010, "y": 380, "wires": [ [ "b727ec1519b5a181" ] ] }, { "id": "b727ec1519b5a181", "type": "switch", "z": "9fae6a4f07359a53", "name": "", "property": "payload", "propertyType": "msg", "rules": [ { "t": "neq", "v": "Brightness", "vt": "flow" }, { "t": "else" } ], "checkall": "true", "repair": false, "outputs": 2, "x": 1190, "y": 380, "wires": [ [ "de60c524a09d4ed9", "579d6da71f12fe9c" ], [] ] }, { "id": "579d6da71f12fe9c", "type": "link out", "z": "9fae6a4f07359a53", "name": "link out 3", "mode": "link", "links": [ "4f409a4348c3336c" ], "x": 1285, "y": 400, "wires": [] }, { "id": "4f409a4348c3336c", "type": "link in", "z": "9fae6a4f07359a53", "name": "link in 4", "links": [ "579d6da71f12fe9c", "d775e7cc56dbeac6" ], "x": 45, "y": 420, "wires": [ [ "af36a800b4bc3cf9", "255652d54d50cada" ] ] }, { "id": "12d3c0aafa98ed16", "type": "link out", "z": "9fae6a4f07359a53", "name": "link out 4", "mode": "link", "links": [ "af6ade35725d93ac" ], "x": 1215, "y": 80, "wires": [] }, { "id": "6d7b734893d635eb", "type": "link out", "z": "9fae6a4f07359a53", "name": "link out 5", "mode": "link", "links": [ "12a89f7554683b42" ], "x": 1215, "y": 160, "wires": [] }, { "id": "d775e7cc56dbeac6", "type": "link out", "z": "9fae6a4f07359a53", "name": "link out 6", "mode": "link", "links": [ "4f409a4348c3336c" ], "x": 1215, "y": 240, "wires": [] }, { "id": "d0d6e0221218181e", "type": "link out", "z": "9fae6a4f07359a53", "name": "link out 7", "mode": "link", "links": [ "2fe116c6b58e03a8" ], "x": 1215, "y": 320, "wires": [] }, { "id": "a21293aba52b197e", "type": "homekit-service", "z": "9fae6a4f07359a53", "isParent": true, "hostType": "0", "bridge": "9ecbb87f3de9fb1b", "accessoryId": "", "parentService": "", "name": "Sisiphus Licht", "serviceName": "Lightbulb", "topic": "", "filter": false, "manufacturer": "NRCHKB", "model": "1.6.1", "serialNo": "Default Serial Number", "firmwareRev": "1.6.1", "hardwareRev": "1.6.1", "softwareRev": "1.6.1", "cameraConfigVideoProcessor": "ffmpeg", "cameraConfigSource": "", "cameraConfigStillImageSource": "", "cameraConfigMaxStreams": 2, "cameraConfigMaxWidth": 1280, "cameraConfigMaxHeight": 720, "cameraConfigMaxFPS": 10, "cameraConfigMaxBitrate": 300, "cameraConfigVideoCodec": "libx264", "cameraConfigAudioCodec": "libfdk_aac", "cameraConfigAudio": false, "cameraConfigPacketSize": 1316, "cameraConfigVerticalFlip": false, "cameraConfigHorizontalFlip": false, "cameraConfigMapVideo": "0:0", "cameraConfigMapAudio": "0:1", "cameraConfigVideoFilter": "scale=1280:720", "cameraConfigAdditionalCommandLine": "-tune zerolatency", "cameraConfigDebug": false, "cameraConfigSnapshotOutput": "disabled", "cameraConfigInterfaceName": "", "characteristicProperties": "{\"Brightness\":true}", "waitForSetupMsg": false, "outputs": 2, "x": 360, "y": 360, "wires": [ [ "e21fe521a2a12d15" ], [] ] }, { "id": "255652d54d50cada", "type": "function", "z": "9fae6a4f07359a53", "name": "Convert2input", "func": "var input = msg.payload;\nif (input < 101) {\n if (input < 1) {\n msg.payload = {\n \"On\": false\n }\n }\n else {\n msg.payload = {\n \"Brightness\": input,\n \"On\": true\n }\n }\n return msg;\n}", "outputs": 1, "timeout": 0, "noerr": 0, "initialize": "", "finalize": "", "libs": [], "x": 180, "y": 360, "wires": [ [ "a21293aba52b197e" ] ] }, { "id": "e21fe521a2a12d15", "type": "function", "z": "9fae6a4f07359a53", "name": "Convert2Value", "func": "var b = context.get('b') \|\| 0;\nif (msg.payload.Brightness) {\n b = msg.payload.Brightness;\n context.set('b', b);\n msg.payload = b\n}\n\n// Uncomment lines 9 and 20 to prevent looping\nif (msg.hap.context !== undefined) {\n if (msg.payload.Brightness === 0) {\n msg.payload = 0\n }\n if (msg.payload.On === false) {\n msg.payload = 0\n }\n if (msg.payload.On === true) {\n msg.payload = b\n }\n return msg\n}", "outputs": 1, "timeout": 0, "noerr": 0, "initialize": "", "finalize": "", "libs": [], "x": 560, "y": 360, "wires": [ [ "40a03d00d8309ebb" ] ] }, { "id": "923f9781e64eae44", "type": "homekit-service", "z": "9fae6a4f07359a53", "isParent": true, "hostType": "0", "bridge": "9ecbb87f3de9fb1b", "accessoryId": "", "parentService": "", "name": "Sisiphus Geschwindigkeit", "serviceName": "Lightbulb", "topic": "", "filter": false, "manufacturer": "NRCHKB", "model": "1.6.1", "serialNo": "Default Serial Number", "firmwareRev": "1.6.1", "hardwareRev": "1.6.1", "softwareRev": "1.6.1", "cameraConfigVideoProcessor": "ffmpeg", "cameraConfigSource": "", "cameraConfigStillImageSource": "", "cameraConfigMaxStreams": 2, "cameraConfigMaxWidth": 1280, "cameraConfigMaxHeight": 720, "cameraConfigMaxFPS": 10, "cameraConfigMaxBitrate": 300, "cameraConfigVideoCodec": "libx264", "cameraConfigAudioCodec": "libfdk_aac", "cameraConfigAudio": false, "cameraConfigPacketSize": 1316, "cameraConfigVerticalFlip": false, "cameraConfigHorizontalFlip": false, "cameraConfigMapVideo": "0:0", "cameraConfigMapAudio": "0:1", "cameraConfigVideoFilter": "scale=1280:720", "cameraConfigAdditionalCommandLine": "-tune zerolatency", "cameraConfigDebug": false, "cameraConfigSnapshotOutput": "disabled", "cameraConfigInterfaceName": "", "characteristicProperties": "{\"Brightness\":true}", "waitForSetupMsg": false, "outputs": 2, "x": 390, "y": 820, "wires": [ [ "b15034ee034d525c" ], [] ] }, { "id": "289f7b79dd7ea6ac", "type": "function", "z": "9fae6a4f07359a53", "name": "Convert2input", "func": "var input = msg.payload;\nif (input < 101) {\n if (input < 1) {\n msg.payload = {\n \"On\": false\n }\n }\n else {\n msg.payload = {\n \"Brightness\": input,\n \"On\": true\n }\n }\n return msg;\n}", "outputs": 1, "timeout": 0, "noerr": 0, "initialize": "", "finalize": "", "libs": [], "x": 180, "y": 820, "wires": [ [ "923f9781e64eae44" ] ] }, { "id": "b15034ee034d525c", "type": "function", "z": "9fae6a4f07359a53", "name": "Convert2Value", "func": "var s = context.get('s') \|\| 0;\nif (msg.payload.Brightness) {\n s = msg.payload.Brightness;\n context.set('s', s);\n msg.payload = s\n}\n\n// Uncomment lines 9 and 20 to prevent looping\nif (msg.hap.context !== undefined) {\n if (msg.payload.Brightness === 0) {\n msg.payload = 0\n }\n if (msg.payload.On === false) {\n msg.payload = 0\n }\n if (msg.payload.On === true) {\n msg.payload = s\n }\n return msg\n}", "outputs": 1, "timeout": 0, "noerr": 0, "initialize": "", "finalize": "", "libs": [], "x": 600, "y": 820, "wires": [ [ "4c05864808a3bc6d" ] ] }, { "id": "dd717e5993d34154", "type": "homekit-service", "z": "9fae6a4f07359a53", "isParent": true, "hostType": "0", "bridge": "9ecbb87f3de9fb1b", "accessoryId": "", "parentService": "", "name": "Sisiphus Bewegung", "serviceName": "Switch", "topic": "", "filter": false, "manufacturer": "NRCHKB", "model": "1.6.1", "serialNo": "Default Serial Number", "firmwareRev": "1.6.1", "hardwareRev": "1.6.1", "softwareRev": "1.6.1", "cameraConfigVideoProcessor": "ffmpeg", "cameraConfigSource": "", "cameraConfigStillImageSource": "", "cameraConfigMaxStreams": 2, "cameraConfigMaxWidth": 1280, "cameraConfigMaxHeight": 720, "cameraConfigMaxFPS": 10, "cameraConfigMaxBitrate": 300, "cameraConfigVideoCodec": "libx264", "cameraConfigAudioCodec": "libfdk_aac", "cameraConfigAudio": false, "cameraConfigPacketSize": 1316, "cameraConfigVerticalFlip": false, "cameraConfigHorizontalFlip": false, "cameraConfigMapVideo": "0:0", "cameraConfigMapAudio": "0:1", "cameraConfigVideoFilter": "scale=1280:720", "cameraConfigAdditionalCommandLine": "-tune zerolatency", "cameraConfigDebug": false, "cameraConfigSnapshotOutput": "disabled", "cameraConfigInterfaceName": "", "characteristicProperties": "{}", "waitForSetupMsg": false, "outputs": 2, "x": 360, "y": 480, "wires": [ [ "62d102a56184237f" ], [] ] }, { "id": "013ed6cf796b5671", "type": "function", "z": "9fae6a4f07359a53", "name": "Convert2input", "func": " var newMsg = {\n \"payload\": {\n \"On\": msg.payload\n }\n }\nreturn newMsg;", "outputs": 1, "timeout": 0, "noerr": 0, "initialize": "", "finalize": "", "libs": [], "x": 160, "y": 480, "wires": [ [ "dd717e5993d34154" ] ] }, { "id": "62d102a56184237f", "type": "change", "z": "9fae6a4f07359a53", "name": "", "rules": [ { "t": "set", "p": "payload", "pt": "msg", "to": "payload.On", "tot": "msg" } ], "action": "", "property": "", "from": "", "to": "", "reg": false, "x": 570, "y": 460, "wires": [ [ "9b345ce68657d103" ] ] }, { "id": "d590150140f5f727", "type": "function", "z": "9fae6a4f07359a53", "name": "Convert2input", "func": " var newMsg = {\n \"payload\": {\n \"On\": msg.payload\n }\n }\nreturn newMsg;", "outputs": 1, "timeout": 0, "noerr": 0, "initialize": "", "finalize": "", "libs": [], "x": 160, "y": 660, "wires": [ [ "4aa20118044ebd5c" ] ] }, { "id": "4aa20118044ebd5c", "type": "homekit-service", "z": "9fae6a4f07359a53", "isParent": true, "hostType": "0", "bridge": "9ecbb87f3de9fb1b", "accessoryId": "", "parentService": "", "name": "Sisiphus Schlafen", "serviceName": "Switch", "topic": "", "filter": false, "manufacturer": "NRCHKB", "model": "1.6.1", "serialNo": "Default Serial Number", "firmwareRev": "1.6.1", "hardwareRev": "1.6.1", "softwareRev": "1.6.1", "cameraConfigVideoProcessor": "ffmpeg", "cameraConfigSource": "", "cameraConfigStillImageSource": "", "cameraConfigMaxStreams": 2, "cameraConfigMaxWidth": 1280, "cameraConfigMaxHeight": 720, "cameraConfigMaxFPS": 10, "cameraConfigMaxBitrate": 300, "cameraConfigVideoCodec": "libx264", "cameraConfigAudioCodec": "libfdk_aac", "cameraConfigAudio": false, "cameraConfigPacketSize": 1316, "cameraConfigVerticalFlip": false, "cameraConfigHorizontalFlip": false, "cameraConfigMapVideo": "0:0", "cameraConfigMapAudio": "0:1", "cameraConfigVideoFilter": "scale=1280:720", "cameraConfigAdditionalCommandLine": "-tune zerolatency", "cameraConfigDebug": false, "cameraConfigSnapshotOutput": "disabled", "cameraConfigInterfaceName": "", "characteristicProperties": "{}", "waitForSetupMsg": false, "outputs": 2, "x": 350, "y": 660, "wires": [ [ "86f316975b609b6f" ], [] ] }, { "id": "86f316975b609b6f", "type": "change", "z": "9fae6a4f07359a53", "name": "", "rules": [ { "t": "set", "p": "payload", "pt": "msg", "to": "payload.On", "tot": "msg" } ], "action": "", "property": "", "from": "", "to": "", "reg": false, "x": 570, "y": 640, "wires": [ [ "14949e5be26a1b5a" ] ] }, { "id": "6554eaffa3deadf7", "type": "ui_group", "name": "Steuerung", "tab": "92d95ee4c013a822", "order": 1, "disp": true, "width": "6", "collapse": false, "className": "" }, { "id": "9ecbb87f3de9fb1b", "type": "homekit-bridge", "bridgeName": "NodeRedBridgeAdapter", "pinCode": "4813-2314", "port": "", "advertiser": "bonjour-hap", "allowInsecureRequest": false, "manufacturer": "NRCHKB", "model": "1.6.1", "serialNo": "Default Serial Number", "firmwareRev": "1.6.1", "hardwareRev": "1.6.1", "softwareRev": "1.6.1", "customMdnsConfig": false, "mdnsMulticast": true, "mdnsInterface": "", "mdnsPort": "", "mdnsIp": "", "mdnsTtl": "", "mdnsLoopback": true, "mdnsReuseAddr": true, "allowMessagePassthrough": true }, { "id": "92d95ee4c013a822", "type": "ui_tab", "name": "Sisyphus", "icon": "dashboard", "disabled": false, "hidden": false } ] Attachment : sisy-1.jpeg
	RE: Table not going to centre or to full radius	4 Relevance	7 years ago	jonj.kay	Table Usage
	Incase anyone happens upon this post and WAnts to know about resolution: After some back and forth pictures and diagnostics with Bruce, The issue WAs identified and the errant part is being replaced; Bruce / Sisyphus Industries is sending the replacement direct to me in NZ. so I would like to record full satisfaction of the Service supplied so far and appreciate that the team is standing by their product and providing excellent Service. Thanks guys.
	RE: Sisyphus Update 1.12.25	2 Relevance	11 months ago	srieseberg	App Updates
	... customer Service or some direction. I WAs able to in the past but that seems to have changed. Please help me get to the current firmware. Also, due to the corrupt file, I do not know the "current" firmware that WAs/is in the corrupt card. Not sure if Siyphus has any issues with large jumps in firmware, please let me know if I need to update prior firmwares first before the most current. Not sure if that is an issue in your company. 🙂 Thank you. Suzanne
	3D Printed Glass Bumper Clips	2 Relevance	3 years ago	Jeff V	Table Customization
	... coming up, I designed a 3D-printable clip to hold aftermarket bumpers in place along the rim. I'm using the "50 pcs 8.5mm X 2.5mm special shape" bumpers from this $9 318 piece set. These bumpers are $9 for 50 ($0.17 each, or $0.03 each if you include the value of the other bumpers included). It takes about 18 minutes to print 6 of them on my printer. I printed them in black PLA-CF. They will be a little tight when you re-insert the wood ring. I WAs just able to press-fit them with the thinner side between the inner surface of the rim and the wood ring. I ...
	RE: Sandify to Sisyphus App ?Best Ragrdas	2 Relevance	5 years ago	Bruce	App Usage
	To do it locally (just on your computer and Sis): Create your track in Sandify. Under "Machine" tab, choose Polar, and the start and endpoint (must be center or perimeter). Hit the Export button - choose Theta Rho format, give it a name, don't add start or end code - hit download. Connect the computer you downloaded the track to, to your Sis using a web browser. From the Sis app running on your browser, go to Settings / Advanced / Upload file(s). Upload file to your table, and be sure to hit "save" once you see the thumbnail of the track show up. To share a track publicly on our "Community" repo - create an account on Webcenter. From there you can upload your tracks, choose whether each is public or not. All public tracks are vetted by our staff to assure they do not violate our terms of Service (nothing overtly offensive, etc...). Once approved, shared tracks will be available using the Community tab on our app.
	RE: comunity tab	2 Relevance	5 years ago	Bruce	Community Tracks
	@robotmastern - The problem is almost certainly because you're on a very old version of the firmware (current is 1.10.83). Try updating (settings>advanced>firmware update). If it doesn't properly update, please contact our Service desk and they'll arrange a fix.
	RE: Twin Peaks Layered Table Art	2 Relevance	5 years ago	Bruce	Community Tracks
	Nice track! The WAy you share (or just store) the tracks you create is in on WebCenter - . Create an account (it is not the same as the account you have on our web site). You can then upload as many tracks as you like. You have complete control over whether you make a track public or not. If you share it, the content goes through a quick approval (just a check to make sure it does not conflict with our terms of Service - things like hate speech, obscenity, etc.), and then is made available for others on our Community.
	Table connects to wifi and works - just causes huge issues to home network.	2 Relevance	6 years ago	nagrani	Connectivity
	Hi. Just bought and installed the table. Looks and works great. However - when the table is plugged in - the entire home wifi has major issues (slow to no connectivity with iMacs, iPhones, etc). Current home setup: Arris SB8200 Router Comcast/Xfinity internet Service 1GB per second Eero home wifi pods plugged into entire home Since the home wifi starts to crash when I use the table - I had to unplug the table - and reset the router.. Everything works like it should but whenever I plug in the sisyphus table - the home wifi starts to crash again. PLEASE HELP!!!!
	Error downloading new tracks	2 Relevance	6 years ago	sisyphusindustries	Beta releases and bugs
	... ]); - file:///private/var/containers/Bundle/Application/273348F3-920B-494F-8467-0206D54E5255/Sisyphus.app/www/plugins/cordova-plugin-wkwebview-engine/src/www/ios/ios-wkwebview-exec.js - 104" This error does not prevent me from downloading new tracks 100% of the time. Around every 10 to 15 tries I will hit this error message, but the track also successfully downloads. Most of the time when I see this error, the track does not download successfully. Either WAy, this error has effectively halted my ability to download new tracks. I am using firmware version ...
	RE: Table is getting "stuck" periodically	2 Relevance	6 years ago	mjends	Table Usage
	I have a variation of this problem -- but appears to be stuck in a cycle that repeats endlessly every 2 min. Brand new table, just unboxed, happens upon startup. I sent in a Service request, but WAnted to also post here in case anyone else has seen this and has a fix / suggestions. I've been through the support posts on table clicking -- arm and slide seem fine and are moving smoothly. More info below if you'd like to read on... (submitted to Sisyphus support June 12, 6:40 PM Hi gang. WAs very excited to receive my metal coffee table today. Unp ...
	RE: New table stuck on "HOMING YOUR TABLE"	2 Relevance	6 years ago	Bev	Table Usage
	Hi Ben, Sorry to hear your new table isn't working properly. It sounds like there is a problem with the home sensor (when the table boots up, the first thing it does is find "home" - first the rotation axis, then the linear). Since you can see the arm rotating, the motor is working - but the sensor is not responding when a tiny "target magnet" passes by it. Try this: Unplug the table. Look under and find the "SisBotBoard" (square circuit board). Check the connectors attached to it by tugging gently - especially the ones with 2 white and 1 black wire (these go to the Theta and Rho sensors). Even if they're not loose, reseat them by depressing the tiny plastic latch and pulling. Then reconnect by pushing in until you hear / feel a click. Neither pulling out or pushing in should require much force. Then try repowering the table. Fingers crossed... Bruce ps- if this doesn't work, follow the 3-wire cables to the two sensors and see if there is anything obvious (they should be firmly glued in place on the plate that holds the motors). Please contact our Service desk if these directions don't work).
	RE: Trouble maintaining connection to table from Safari	2 Relevance	8 years ago	Bruce	Connectivity
	Hey Jessica - sorry- I missed your prior post. This sounds like a problem with Bonjour (a Service Apple created that converts alias names to their local IP address). I've alerted our devs and we're trying to figure out a WAy to make it more robust. I the mean time, using the IP address will work (which you've figured out). Bruce
	Option to reverse RGBW color rho?	2 Relevance	6 years ago	belross	App Updates
	Hi, I love my 36" coffee table. A while back I upgraded the lights with RGBW NeoPixels and an Arduino and it WAs even more amazing. I WAs happy when the retrofit kits came out, so I ordered one. A customer Service rep WAs kind enough to discount the kit by leaving the LEDs out (since I already had that) so I only upgraded with the light control board. The NeoPixels work perfectly with the Sisyphus control board, but unfortunately I must have gotten something mixed up when I originally swapped out the lights - colors modes with a rho follow are inverted! If ...
	RE: Shipping Woes	2 Relevance	8 years ago	heropup	Beta releases and bugs
	Your experience sounds very similar to mine, which you can read about in this thread: I believe the responsibility is on FedEx to use proper handling procedures. A shipment that weighs nearly 100 pounds and has a label on it that says two people are needed to lift it, should not be carted over uneven pavement by a single employee and rolled corner over corner, which is what happened to me. FedEx is being paid for this Service and such practices, in my opinion, are not compliant. That said, modification to the package design could help reduce problems caused by rough handling. I suspect that the cardboard insert placed underneath the table could push against the metal support arms that hold the Sisbot, if the side of the box were pressed in. If this insert were altered (for example, modifying the profile so that part of it sits under the outer edge of the table), then it would provide more resistance to being pushed into these supports.
	RE: Connecting to Sisyphus via SSH	2 Relevance	8 years ago	Bruce	Connectivity
	... finds your table, it will ask you to login - name: pi, Password: the PW I sent you. Notes: The default password for Raspberry Pi's is "raspberry". We changed it due to security concerns(we don't WAnt hackers messing with your table!). You can use your table's name (a.k.a. alias, like "sisyphus") as the hostname, but you have to add ".local" - e.g. Host: sisyphus.local. If that doesn't work, you can find the actual IP address by using either your phone app or browser interface / Settings / Advanced / IP address is displayed next to "Sisyphus IP Address". ...

Search result for: WA 0821 1305 0400 Service XRF Thermo Gun Cepat Malinau Kalimantan Utara [[Tiga Pillar]]

SHOP

INFO

ACCOUNT

HELP

FOLLOW US