Notifications
Clear all
Search result for: WA 0821 1305 0400 [[Tigapillar]] Teknisi XRF Material Test Wilayah Ciamis Jawa Barat
Page 1 / 2
Next
| # | Post Title | Result Info | Date | User | Forum |
| RE: Solution to berm concerns | 9 Relevance | 5 years ago | Bruce | Table Usage | |
| Thanks for sharing your findings. Although it's taken us considerably longer to take the idea of using a "magnetically coupled rake" through the glass seriously, we've recently begun to Test this idea out. Couple caveats: Be careful not only with the upper surface of the glass, but also the underside. If the "rake" (in your case a stainless bar) is pulled up too intensely by the magnet, it can chip / scratch the glass. We are evaluating the proper strength magnet to use (with felt between it and the glass), as well as a rake that is designed to work well without damaging the underside of the glass. Most stainless alloys are not ferromagnetic (or very weakly so). If you intend to use stainless, Test it with a magnet . Generally, 300 series are non-magnetic; 400 series are. | |||||
| RE: Homebrew Accent Table Build | 9 Relevance | 7 years ago | makerbobdesigns | Table Customization | |
| Parking hits the spot! I have decided that this will be a truly mixed Materials project. After a while thinking of a good WAy to make the acrylic sides of the drawing area with nice even bends, I thought it would be a good time to explore different Materials. Aluminum angle would be easy to snip and bend every 5° or so, but it would be a pain to isolate the LEDs from it. I found some PVC edge trim at the local hardware store that is 1-1/8" tall. A bit shorter than I WAnted, but it will work out. I took my parking "valet" with me, and lo and behold, it fits ... | |||||
| Home Assistant Automation with Sisyphus | 9 Relevance | 8 years ago | cameron.meindl | Table Customization | |
| Following on from playing around with the flic buttons to control my sisyphus table via a home automation hub, I use home assistant at home so I have set it up to control my sisyphus, Current setup is When an erase track starts set speed to 100%When erase track finishes set back to 30%When I leave home pause the tableWhen I return Resume the table.You can also adjust the Speed and brightness of Sisyphus in home assistant with slide bars and Pause / Unpause etc with clickable scripts.If there is interest I can publish my whole config to Github for users, but to Test you can add the following to your Home assistant configs to Test Sisyphus if you do config.yaml, groups.yaml and scripts.yaml first you can see the status of Sisyphus without worrying about making the automation work (As it depends on having presence detection setup) Ill Attach 1 file to each post (If you just use configuration.yaml) you will be able to see the Status of Sisyphus in the top header of home assistant. Attachment : configuration.yaml_.txt | |||||
| RE: More Sandify and XYLA table questions | 5 Relevance | 2 years ago | jrambonnet | Community Tracks | |
| ... them to the XYLA table. During the upload, the browser becomes unresponsive and I click the WAIT button for it to continue the process. This popup can happen several times before the track is actually rendered on the screen and I'm able to save it. When I click to save the track, the browser loses connectivity to the table, even to the point that I have to unplug it to regain browser connectivity. But then, I notice that the track that WAs supposedly uploaded, is not in the library. It seems that I can only be successful with very simple tracks (like s ... | |||||
| RE: Acrylic top for table? | 5 Relevance | 5 years ago | Bev | Table Customization | |
| We did Test acrylic early on on our prototypes - but abandoned the idea because of the static issue you describe. However - you needn't worry about the glass shattering. It's tempered, and not easily broken. In the unlikely event you drop it on a stone / ceramic floor, it could shatter (and the pieces could end up spread over a large area), but they would not be sharp - more like small irregular cubes. Here's the result of our early "toughness Testing" - Bruce (accidentally signed in as Bev) | |||||
| RE: Sisyphus for the rest of us? | 5 Relevance | 5 years ago | Patti | Community Tracks | |
| I used this today to create a Test file for diagnosing a really weird problem with my new table. It worked extremely well for my image, which admittedly is rather simple. I just uploaded the image and it handed me a .thr file. Attachment : WellHello.jpg | |||||
| RE: Single-step mode? | 5 Relevance | 6 years ago | Mark Roland | App Updates | |
| My code doesn't enforce the start/end at Rho 0/1, but it does normalize the radius between 0 and 1. John should be able to use it to enter his theta-rho coordinates to Test and train his intuition on the coordinate system. | |||||
| RE: Impact of relative ball size? | 5 Relevance | 6 years ago | dithermaster | Table Customization | |
| Most tracks will work with any of those "% of sand field" ratios. However, some tracks might be more sensitive to it, such as my "ying yang" and "it's your move" tracks. They were designed on my 2' side table, which fortunately is in the middle of the ranges. I need to try them on my mini, and I'm curious what they look like on the coffee tables. I'd be happy to create custom versions for different size tables and ball sizes, but without a WAy to Test them, it's hard. | |||||
| RE: Beta App Testers | 5 Relevance | 7 years ago | curtis | Beta releases and bugs | |
| jonj-kay, I noticed the release that WAs published on Test Flight and the one I intended for the group to have our not the same. I am WAiting for apple to review the version I would like you to use. (which has log-in credential persistence) and some other features. Look for 1.8.56 in the next day or so. Sorry for pushing the old version and thanks for the info! Curtis | |||||
| RE: Cannot connect to Sisyphus wifi, fails to find ip | 5 Relevance | 5 years ago | antoine.bertout | Connectivity | |
| Hello and thanks for sharing this tip. I have just received my Mini Executive and found exact similar issue. I am going to Test this possible fix now and let you know UPDATE: this is indeed fixing this IP issue. I WAs not able to connect at the first reboot. For some reason, once connected to the hotspot, when trying to connect to my Internet it did not find my router at the beginning. I had to reboot once again and forget all previous connections to then be able to reconnect to the hotspot and find my router in a list. | |||||
| RE: Table is getting "stuck" periodically | 5 Relevance | 6 years ago | Bruce | Table Usage | |
| Though it can be tough to exactly identify the cause of noises or other issues remotely, the descriptions and the video definitely point to a problem with Rho homing - which works using a stationary Hall effect sensor positioned to sense a small magnet in the Rho carriage (sliding part where the mag-arms are attached). If it fails to sense the target magnet, the Rho axis runs into its end, and the motor "stalls" (which causes the "mini jack-hammer" sound). After it "thinks" it has moved the entire length of the Rho arm, it then backs out and tries again - which usually works when the problem is not serious. This does not harm the motor or mechanism, but obviously is undesirable. We Test every Sisbot thoroughly prior to shipping, but on rare occasion, things can shift during transit (the sensor's connector to the SisBotBoard can get loose, or the sensor itself). If our support team cannot help you fix it, the solution is to send out a replacement Sisbot to swap in. | |||||
| RE: Latest iOS version not connecting | 5 Relevance | 7 years ago | mgraf68 | Connectivity | |
| Same troubles here. Plus I get really screwy behavior at times trying to pull up available WiFi networks (screenshot). Other times when the networks pull up, the app automatically switches to the "Switching Wifi Networks" screen before I even finish typing in the password. Then it will pop back to the network selection screen again, and all the networks are gone. This is one of the buggiest app updates I have ever seen. I even resorted to doing a factory reset and losing all my uploaded tracks and playlists, only to return to the same issues when updating to the latest firmware. I really hate being nervous about every single firmware update (and now app updates) with my table. Seems it has turned into that. ???? Seems like deficient QA Test procedures? Attachment : IMG_4841.jpg | |||||
| Sisyphus Table Text Generator - need comments please | 5 Relevance | 7 years ago | crsolomon | Community Tracks | |
| I have written a program (in Windows Small Basic) that generates 3 lines of text and writes out a .thr file to play on any table. I would appreciate if I can get some folks in the community to Test it and give comments. It seems pretty bulletproof at this point but the interface is very basic. The program has an attached data file with the character information for small and large letters as well as numbers (so it can be edited for improvement if desired) All it needs are these 2 files to be in the same directory - the .thr file will be written to the same place. Space is limited and the message has limits in size on each line - it will not let you exceed the boundaries of the table. I attached a picture of the output too. Anyone interested in trying this out? Attachment : Sisyphus.jpg Attachment : abc.txt | |||||
| RE: "Pause between tracks" | 5 Relevance | 8 years ago | Bruce | Table Usage | |
| OK - I finally got this work, after following your example for setting brightness (which surprised me and worked :). The key, for me, WAs that in the set_brightness example, the body started with data= not {"data": So, if I follow your pause/play example, substituting 192.168.0.124 (my Test-table's local IP address) for your 192.168.0.13, AND change {"data":{}} to data={} it now works! | |||||
| "Pause between tracks" | 5 Relevance | 8 years ago | jonj.kay | Table Usage | |
| On the speed option there is a "pause between tracks" tickbox; does this pause indefinetly i.e until play is pressed on the app/browser interface or a pause of a number of minutes/seconds? (Have not been able to leave it alone long enough to Test before a member of the family fires up an app and goes for another track!! cheers j | |||||
| Ball Bearing Magnetic Properties | 4 Relevance | 5 years ago | SteveTheEvans | Table Customization | |
| I have a new mini with which I WAnt to experiment with different ball sizes. I'm not sure which ball bearing Material I need to use. Stainless steel is generally not highly attracted to magnets, but this is what most of the ball bearing variety kits are made of. What Material (or stainless steel grade) are the balls that come with the Sisyphus made of, and what other Materials/grades will also work? | |||||
| RE: Magnet shaving bottom of table | 2 Relevance | 4 years ago | Bruce | Table Usage | |
| @rick-yeh This is definitely not normal function -- I will alert our support team, but also, please start a ticket so we can keep track of it: follow up: Support is already working with you (they suspect the dust is from the cardboard WAffle-board padding which we cut to size in our shop) and have relayed instructions for removing it and inspecting the low-friction pad on the magnet for signs of wear or foreign Material. Rest assured - we will make sure the problem is fixed! | |||||
| RE: Default track after reset | 2 Relevance | 5 years ago | Bruce | Table Usage | |
| Yes. The key is putting the default track into a playlist. The current behavior of Sisyphi after bootup, is to play the playlist that WAs playing when it WAs last powered. If it WAs not playing a playlist, it plays the Default playlist. So just create a new playlist with your desired default track in it. Note: if you WAnt a single track in a playlist, you must add it twice (playlists must have more than one track). This is sort of a safeguard against playing a single track in repeat mode, which can cause the ball to retrace the exact same path 100's - 1000's ... | |||||
| RE: Firmware version 1.5.4 | 5 Relevance | 8 years ago | Bruce | Beta releases and bugs | |
| ... support) shouldn't (we hope) cause any bad effects on the metal tables' functioning. But one thing you can see is a major change in homing. On boot up all tables do a "sensored home", moving each axis slowly toward a sensor (theta first then rho second) - which is unchanged. From then on the table "knows" where home is. Now, whenever you manually choose a different playlist or single track to play, it homes by "dead-reckoning" - moving both axes simultaneously, directly home (no need to "feel" its WAy). The practical effect is that, when you choose differ ... | |||||
| RE: Ballpark problem | 4 Relevance | 5 years ago | Bruce | Table Usage | |
| We understand your frustrations - which is why we've discontinued two-ball mode as a "standard" feature (it can still be ordered as an add-on). Despite our concerted efforts to make it bullet proof, we haven't been able to make it 100% reliable. It's extremely unforgiving (as you've experienced) - any travel past Rho = 1 is at risk of hitting it. And yes, Community tracks may have out of bounds vertices, but they "should" be caught and clamped to 1 by our software. It's evidently not working all the time (and not every user has updated to the most recent firmware). In answer to your question: The ballpark is affixed using strong double-edged tape (carpet tape). To remove it, carefully work a "blade" (butter knife) in between it and the cushion Material it's stuck to. Gently pry the ballpark upward while holding the cushion Material down at the rising edge of the ballpark so the cushion separates from it (and isn't pulled up with it). | |||||
Page 1 / 2
Next
We take your privacy seriously and will only use your personal information to provide you with the products and services you request from us. Please see our privacy policy for more details.