Search result for:  WA 0852 2611 9277 [[Glorion Plafon]] Tukang Plafon PVC Doff White Jatinegara Jakarta Timur

Okay, this is a different scenario than I read initially, but now it's clear to me. The router you're using has a captive portal login. There are a couple obstacles to using a Sisyphus table on this type of network: Our app does not support establishing this type of connection. Captive portals frequently have client isolation. So even if the device did connect the mobile app would not be able to communicate with it. If client isolation is not enforced it would be accessible to all others on the network. Many organizations using a captive portal would consider this as not an approved device for connecting to their network. Currently the only workaround is to have the network admin White list the device by mac address and ensure client isolation is not enforced. Thanks

Like every time-based medium (I can think of), the creative space is practically infinite. The reason I like the LIFEX Z is it's a ready-made, off the shelf product. But heck yeah, it would be wonderful to have a cheaper, more capable option that can tie into the Sis API. Micah just started messing with Fadecandy and Neopixels (RGB+W). It looks like there's a big limit with that avenue - it's not made for strips with more the 64 pixels (and that's for RGB, with White it's 48). You can run 8 strips, so it is possible to orchestrate things around a table - but it's suboptimal. Do you use Neopixels or Dotstars? I'm assuming Neo, since you show an RGBW in your example. Would absolutely love to collaborate with you! What can we do to get help you get started? Bruce

... This WAs the hard part, because you don't WAnt to nick the cable as you're drilling. While working, it helps to peel the fabric cover away and temporarily hold the corners down using tape. Then I drilled out a hole just large enough to pass the LIFX Z connector. The result WAs fairly clean (but I didn't take photos). It is also superior to the WAy I modified the end table, since the drilling of the hole allows enough space for both connector cables to thread through, so both the original and LIFX strips are controllable. I thought about reapplying sil ...

I did flip it upside-down! I just assumed that since you had put them at the top, that WAs the right place for the to be to get the best contrast. 🙂 I could theoretically run them both, but I ended up leaving the original lights unplugged for three reasons: 1) The lifx z has the ability to do any White that I WAnt, so there WAsn't really a good need for the original strip, 2) you can see the strip clearly if you are low (i.e. laying on the couch, so I thought that might be distracting, and 3) I would have had to have made my hole even a tiny bit bigger to g ...

... through, made that slot just big enough to fit the LED cord through (using an exacto knife and a micro hacking method), patted down the velvet, replaced the LED hoop upside-down and plugged it in! It is GORGEOUS!!!! The whole thing took maybe 30 minutes, most of which WAs spent hacking away at the table. I am certain someone with tools and skills could do it faster and better, but the truth is that you cannot see the damage created unless you take the glass top and the ring off of the table. Two notes: 1) I have a 3' table and need to order one extensio ...

I thought I would express my delight with my 3 footer in a traditional geek WAy: Ask for more features! Naturally, my real motive is to spark discussion of WAys to enhance it without breaking what makes it so amazing. Here's a couple of things that have been rattling around my head. I'm sure a few more crazier ideas will shake loose eventually. Live Title Card. This would be a thin, nearly border-less eInk display that could either sit on the table top or be hung on a WAll nearby. Its design should scream "museum title card". It could update occasionally ...